HB – Cyclone D4 New Parts

Centre One-Way Set
61531_01.jpg

Add to your arsenal of tuning options for the Cyclone D4 with this Centre One-Way Set for the front wheels.

Replacing parts in the front centre driveshaft, the centre one-way drives the front diff when on-power, but allows the diff to rotate independently of the drivetrain when the car is off-power. This allows the front wheels to still have feedback to the diff, something that is not possible when using just the one-way differential.

61531_02.jpg

61531_03.jpg

Shock Spring 14x70x1.1mm
(Rear / White / 35GF / 2 PCS)

61509_01.jpg

Tune your Cyclone D4 for all track conditions with the full range of Hot Bodies racing springs! Made to exacting standards and measured in grams of force per millimeter, these are the most precise matched springs you can get for any racing buggy. Both ends each spring are ground flat for consistent performance left and right.
One end of each spring is colour-coded so you know what springs you are running, but your competition won’t. The rest of the spring is coated in a tough dark colour which looks great on the track and won’t rub or flake off.

Sold in pairs.

FRONT SPRINGS
#61503 – SHOCK SPRING 14x40x1.1mm (BLACK 63gf)
#61504 – SHOCK SPRING 14x40x1.1mm (WHITE 68gf/)
#61505 – SHOCK SPRING 14x40x1.1mm (PINK 74gf)

REAR SPRINGS
#61508 – SHOCK SPRING 14x70x1.1mm (BLACK 34gf/)
#61509 – SHOCK SPRING 14x70x1.1mm (WHITE 35gf)
#61510 – SHOCK SPRING 14x70x1.1mm (PINK 36gf)

Shock Spring 14x40x1.1mm
(Front / White / 68GF / 2 pcs)

61504_01.jpg

Tune your Cyclone D4 for all track conditions with the full range of Hot Bodies racing springs! Made to exacting standards and measured in grams of force per millimeter, these are the most precise matched springs you can get for any racing buggy. Both ends each spring are ground flat for consistent performance left and right.
One end of each spring is colour-coded so you know what springs you are running, but your competition won’t. The rest of the spring is coated in a tough dark colour which looks great on the track and won’t rub or flake off.

Front Wheel Hub Set for Losi Wheel (Steel/Black/2pcs)
61499_01.jpg

Use these wheel hubs to fit Losi 4WD front wheels to the Cyclone D4, allowing you to re-use tyre and wheel sets you may already have to make the transition to the D4 easy!

Made from steel for extra durability, you get a pair of wheel hubs, all you need to get rolling with Losi front wheels on your Cyclone D4.

Source : HPI

This entry was posted in HPI. Bookmark the permalink.