Tamiya – Subaru Impreza WRC – TNS-FD Chassis

43533logo.gif

43533top.jpg

Translation:

The rally machine where the intense running of tar Mack matches
Making light exhaust sound echo, the engine RC car which it runs. Putting out from the box, you just insert the fuel you can taste the enjoyment, it assembles and in the engine RC car series of being completed, worldwide rally championship commencement game 2007, the Subaru in presser WRC which showed participating with the Monte Carlo rally joins. It has the blister fender where the edge is effective, force reproducing the forum which overflows to real with polycarbonate. The large-sized rear wing and the door mirror of rectangularity which equip the splitter tighten style. Of course, the body which was painted in the metallic blue pastes also many sponsor marks, being completed. In addition to the completion body, setting also the transmitter of the wheel type which is suited for the control of the car, exciting intense running is the pleasure.

43533engine.jpg

FS-12FD (2.1cc) adoption 4WD chassis of engine loading
2.5mm thick aluminum alloy make rotary and the high rigidity which consists of the resin make upper deck it loads the Tamiya FS-12FD engine of aerodynamic volume displacement 2.1cc onto the double deck frame, adopting the shaft drive 4WD whose reliability is high. The FS-12FD engine starting easily is with the recoil starter attachment with sufficient power. Double wishbone four wheel independence of the oil damper attachment which approximately builds in the high accuracy diff. gear to the direct vent system body, as for suspension is superior in road-hugging. Showing high road holding efficiency, the high performance it can enjoy running fully. Furthermore, it equips also the large diameter disk brake which is proud of powerful damping force. Loading the 65cc fuel tank of the choke pump attachment, travelling of approximately 5 parts is possible in 1 tanks.

Basic specifications 
– Total length =446mm
– Full-width =186mm
– Total height =141mm
– Wheel base =257mm
– Chassis material =2.5mm thick aluminum make [rowa] + glass strengthening nylon resin make upper double deck
– Also suspension = front and back double wishbone
– Drive system = shaft drive full-time 4WD
– Tire width/diameter =27/65mm
– Channel 2 transmitter attachments of wheel type
– Engine =FS-12FD (2.1cc)
– Fuel tank =65cc

Source : Tamiya

This entry was posted in Tamiya. Bookmark the permalink.