These images are from Trinity eastern states challenge last weekend.
This GV2 will be released this month.
- Threaded shocks with bladders that can be flipped upside down for a more
conventional emulsion type shock feel.
- No e-clips (captured hingepins)
- 27.5 kick-up with bellcrank matching the same angle
- Vertical ball studs on the front and rear bulkheads
- Rear axle will accept the ACADEMY hex rear rim, along with “MOST” other pin
drive rims
- Front axle will accept the ACADEMY metric front bearing/rim, but…..
there will be an additionaL ASE sized axle included to that Team Associated
B4 front rims, and Proline B4 rims can be used as welL.
- Aluminum hingepin blocks have plastic balls that snap into them so that
there is not excess force applied to the aluminum when changing
antisquat / toe-in.
- Steel outdrives with Over Sized rings, that makes for a longer lasting diff
- Gear cover that is virtually air tight, gear cover plug is tethered to the
gear cover so that you dont lose it.
- Chunky CVA drives make the rear suspension bind free throughout
suspension travel.
- Multi Length Pivot (MLP) on the hub carrier and rear arm for long or short
suspension geometry.
- Front bulkhead and shock tower are keyed and screwed together.
- Front hingepin block is keyed into both the upper bulkhead and also
the lower bulkhead.
- Front Hingepin block has replaceable teflon sleeves.
- Rack or traditional style bellcrank is offered
Read the rest of this entry »
No Comments »
FX Series Professional Brushed Speed Controllers
The FX series blasts off into a new era of brushed speed controls from Tekin! With a new, smaller footprint (less than 1 square inch) and using groundbreaking, flash-programmable microcontrollers with the lowest on-resistance MOSFETS ever used in a speed controller, the FX completely eliminates any power bottleneck between your battery and motor! The FX is also capable of extensive tuning via PC with Tekin’s HotWire PC Interface.
Available in :
Read the rest of this entry »
No Comments »
Posted by: rceasy in Team Losi
Losi brings the power and excitement of full-size monster truck action anywhere you want it with the 1/18-scale Dodge Raminator Monster Truck.
- Dodge Officially Licensed Product
- Strong dual-deck aluminum chassis
- Massive coil-over, oil-filled shocks
- Complete Losi synthesized radio system
- Includes rechargeable battery and wall charger
- Powerful dual-steering servos
- Hall Brothers Racing approved
Read the rest of this entry »
No Comments »
NOW in STOCK
Accessories for 1/10 scale Touring Car Body
Add some bling to make your car stand out from the crowd with the realistic HPI Body Tuner Kit. You get a large diameter custom chrome exhaust, a detailed front intercooler, and 3 different kinds of side view mirrors.
The radiator and exhaust include molded nylon mounts that keep them firmly attached to your bodyshelland allow you to adjust the location and angle. Bolt on your choice of 3 different side mirror styles and you’re ready for action!
Read the rest of this entry »
No Comments »
There were two classes in this event: 1/8th and 1/10th on-road. This is the third annual running of the Novarossi Cup in Malaysia and I believe it is turning into a pretty grand on-road event in Malaysia. Participants came from all over the South East Asia region - Taiwan, Indonesia, Thailand, Singapore, and Malaysia. There were 50 participants in the 1/8th class and 70 participants in the 1/10th class.
Read the rest of this entry »
No Comments »
Posted by: rceasy in Tamiya
Available in Sep 15, 2007
Translation :
The section of the SC spirit which piles up the point with the steady running
In super GT 2007, the fact that good fight was shown with drive of the Tsuchiya warrior and the woven door study both player is ECLIPSE ADVAN SC430. Rec suspension SC430 of luxury [opunsupotsukupe] in the base, pursues the aerodynamics the body which to accomplish large transformation, the majority of the bodies the carbon make. 4.5 liter V8 engine is loaded onto the front, the trance axle which the diff. makes the gear box unify is adopted. Graphics of the lead-lead and the silver was allotted by the body which designates white as the base, car audio & the navigation brand of the Fujitsu ten which becomes the main sponsor in the side and the bonnet etc, the logograph of ECLIPSE was largely drawn. Force with 2 belt drive 4WD chassis of the body and the high efficiency which reproduce the forum which overflows to real the high performance becoming the electromotive RC car which can enjoy running, it is appearance.
Read the rest of this entry »
No Comments »
#3591 WORK MEISTER S1 WHEEL 26mm CHROME (3mm OFFSET)
#3592 WORK MEISTER S1 WHEEL 26mm CHROME (6mm OFFSET)
#3593 WORK MEISTER S1 WHEEL 26mm CHROME (9mm OFFSET)
Get wide and wild with the officially licenced Work Meister line of wheels from HPI! Available in 3mm, 6mm and massive 9mm offsets, these are the perfect way to widen the stance of any car to fit 200mm wide bodyshells and HPI’s Vintage line of bodyshells with 210mm rear width.
Read the rest of this entry »
No Comments »
HPI classic 1/18th scale Micro RS4® is available in new exciting versions: Sport (RTR or pre-assembled) and Drift! (RTR or pre-assembled)
Read the rest of this entry »
No Comments »
Entries (RSS)