FX Series Professional Brushed Speed Controllers
The FX series blasts off into a new era of brushed speed controls from Tekin! With a new, smaller footprint (less than 1 square inch) and using groundbreaking, flash-programmable microcontrollers with the lowest on-resistance MOSFETS ever used in a speed controller, the FX completely eliminates any power bottleneck between your battery and motor! The FX is also capable of extensive tuning via PC with Tekin’s HotWire PC Interface.
Available in :
- FX
- FXPRO
- FX-R
- FX-R PRO
FEATURES:
- Easily Access All Programming, Anywhere, Anytime
- On-Board Temperature Indicator
- PC Interface for Custom Programming *Tekin HotWire Required
- HDAC: High Density Copper Fet Boards
- Solder Posts for Easy Wire Replacement
- Self Test Diagnostics and Factory Reset
- Pit Tune Mode
- Digital Glitch Filtering
- QuickTune™ One-Touch Programming
- One-Touch Radio Calibration
PROGRAM FEATURES:
- Drag Brake (13 steps)
- Neutral Width (13 Steps)
- Current Limiter (none, 12 steps)
- Push Control- Anti Drag (13 steps)
- FX, FXPro: Throttle Profiles (7 choices)
- FX, FXPro: Brake Profiles (7 choices)
- FX-R,FX-R Pro: Reverse Type (3 choices)
- FX-R,FX-R Pro: Reverse Strength (13 steps)
- Voltage Cutoffs (none, 2S, 3S, Custom)
- Tuning via Tekin HotWire PC Interface (sold separately)
| FX Specifications | |
| Controls: ON Resistance: Input Voltage: BEC: Motor Limit: Throttle Profiles: Brake Profiles: Dimensions: |
Forward / Brake 0.0003 Ohm 4-9 Cells / 2-3S Lipo 6.0V / 3.0A 10 Turn 7 Choices 7 Choices 1.0 x 0.80 x 0.40 ” (25.4 x 20 x 10mm) |
| FXPro Specifications | |
| Controls: ON Resistance: Input Voltage: BEC: Motor Limit: Throttle Profiles: Brake Profiles: Dimensions: |
Forward / Brake 0.00015 Ohm 4-9 Cells / 2-3S Lipo 6.0V / 3.0A No Motor Limit 7 Choices 7 Choices 1.0 x 0.80 x 0.60 ” (25.4 x 20 x 15.24mm) |
| FX-R Specifications | |
| Controls: ON Resistance: Input Voltage: BEC: Motor Limit: Rev Type: Rev Strength: Dimensions: |
Forward / Brake / Reverse 0.0012 Ohm 4-9 Cells / 2-3S Lipo 6.0V / 3.0A 12 Turn 3 Choices 13 Steps 1.0 x 0.80 x 0.40 ” (25.4 x 20 x 10mm) |
| FX-R Pro Specifications | |
| Controls: ON Resistance: Input Voltage: BEC: Motor Limit: Rev Type: Rev Strength: Dimensions: |
Forward / Brake / Reverse 0.0006 Ohm 4-9 Cells / 2-3S Lipo 6.0V / 3.0A 10 Turn 3 Choices 13 Steps 1.0 x 0.80 x 0.60 ” (25.4 x 20 x 15.24mm) |
Source : Team Tekin
Entries (RSS)