Tamiya – TRF416 Chassis Kit

header_42106.jpg

In recent years, world-class on-road R/C touring car race events have encouraged the use of brushless motors in conjunction with event-controlled tires. To achieve success under such conditions, a fine balance must be achieved between handling and tire wear. It is with this in mind that Tamiya designers developed the concept of the brand new TRF416 chassis.

gallery_42106.jpg

About the Model

  • 1/10 scale assembly kit R/C model of the TRF416 chassis.
  • New 2.25mm lower deck design emphasizes simplicity, while the 2mm upper deck has been lengthened.
  • Front and rear bulkheads feature the same width while everything about the chassis down to the screw locations has been designed for optimum symmetry for better roll characteristics.
  • In order to obtain maximum traction, both the motor and the center shaft positions have been moved back to shift more weight to the rear of the car.
  • Drivetrain features front direct-drive, center direct-drive, and rear ball diff.
  • Front and rear uprights equipped with 1050 size ball bearings.
  • 37T pulleys for front and rear, while an 18T pulley is installed in the center.
  • R/C system, body, tires, motor, ESC, battery & charger separately required.
  • ELECTRIC KITS REQUIRE:

    (unless stated differently above)

    • Radio: 2-Channel with servo(s)
    • Battery: 6-cell flat with standard Tamiya connector
    • Charger: AC/DC timed or peak for 6-cell battery
    • Paint: PS for Polycarbonate/TS for ABS
    • Misc. Items: Building and track equipment

    Source : Tamiya

    This entry was posted in Tamiya. Bookmark the permalink.