O’Donnell Z01B 1/8 scale buggy

Designed by O’Donnell — tested by Tebo —
and proven in top competition.

The word is out, and the results are in. The Z01-B is easily the most dependable, durable, consistent buggy platform ever created for 1/8 scale nitro buggy racing.
• Low-profile oval air filter — filters out dust, dirt and grime
• Adjustable front/rear swaybars
• Aluminum heat sink engine mount
• Aluminum rear toe-block
• Transponder mount
• Front/rear chassis braces
• Multi-spoke wheels (4)
• Covered wheel nuts
• Race-legal fuel tank w/ splash guard
• Low-profile polycarbonate body
• Molded nylon wing
• High-performance rubbersealed bearings
• Independent front suspension w/adjustable camber, caster and toe-in
• Rapid Reaction independent rear suspension w/adjustable camber, toe-in, ride height
and wheelbase
• Spiral-cut, machined steel pinion and diff gears for high efficiency, less friction, better mesh and more tooth contact
• Sintered metal sun/satellite gears
• Machined/lightened steel spur gear
• Hex-head hardware — Strong, countersunk and strip resistant. Full-length threads on hardware and attachment points to “lock” parts in place.
• Sealed receiver box
• 3 constant-pitch spring sets — Soft, medium and firm, color-coded for easy reference
• Captured hinge pins
• Dual-disc brake system — Features adjustable front/ rear bias, an oversized front disc, heat-treated hardware and extra-thick brake
• Dual, high-volume fuel filters — Minimize maintenance and hold 5 cc of fuel!

Optimized servo positioning lowers the CG and turns the arm and linkage inboard to eliminate impact damage.

Outdrives are machined, lightened and nickel-plated, to reduce weight and wear.

Hard anodizing and CNC-machining helps the ZO1-B’s lightened aluminum towers outlast anything the track dishes out.

Threaded, hard-anodized aluminum shocks feature polished 4 mm shafts and “High-Volume” bodies for maximum durability and dampening.

Hard-anodized, lightened, CNC-machined aluminum parts
• Rear shock tower
• Front shock tower
• Front steering knuckles
• Shock caps
• Countersunk main chassis
• Center dogbone driveshafts

Nickel-plated steel parts
• Front/rear CV driveshafts
• Lightened outdrives
• Steering link
• Camber link

Carbon-fiber components
• Servo tray
• Front plate
• Center diff top plate

Length: 20 in (510 mm) Width: 12 in (305 mm) Height: 7.5 in (190 mm)
Weight: 6 lb (2,720 g) Wheelbase: 13 in (330 mm)
F/R Track: 10.25/10.5 in (260/275 mm)

Source : www.odonnellracing.com & RC Car Action

This entry was posted in RCeasy News. Bookmark the permalink.