Start walking on air as soon as you open the box! A new concept that breaks the mold of 2-channel helicopters. 2.4GHz system allows up to 25 machines to be operated at the same time.

Gently lift off from the palm of your hand to take an air-walk around the room until it’s time to touch down near the coffee cup. Simply use the transmitter to charge the Lithium Polymer battery in the machine to complete pre-flight preparation. Unlike commonly available toy R/C helicopters, this machine uses 2.4GHz frequency for constant control stability. Up to 25 machines can be flown at the same time. Ways to enjoy the Robo Hopper are limited only by your imagination, so why not show your friends whose boss in a competition. The super lightweight body is resilient to bumps and small accidents so you can have peace of mind to continue challenging new things. In the event of a breakage, the rotors and pilot can be replaced. Add four AA-sized alkaline batteries (sold separately) to the transmitter that also acts as a Li-Po battery charger as well as a controller. For lighthearted fun, this is a unique experience in helicopter flight.

Read the rest of this entry »

CLASS:

• Open Modified Class
• Stock Class 23T Motor
• ports Class 27-30T Motor

TIRE:

• Control Tire

PLACE:
Radio Control Speedway
16 SOI SUAYAIUTHIT , LADYAO , JADUJAG 10900
TEL: 662-930-0824 FAX: 662-930-0849 www.rcs.co.th

Source : TITC

The Yokomo SD12-TV is a new kind of radio-controlled car that is perfectly suited for driving indoors due to its ability to move at low speeds. Featuring a high-performance four-wheel drive (4WD) system, it also drives well outdoors on poor road surfaces. In addition, it can perform an impressive feat of climbing steep inclines where other R/C cars couldn’t stand a chance. Yet, anyone, including those who are new to radio-controlled cars, can pick up this car and start driving anywhere.

Read the rest of this entry »

These superbly crafted, black, hard coated chassis stiffeners are designed to improve the M1 buggy’s performance on high bite, manicured tracks that are seen in many countries around the world. In these conditions, a stiffer chassis will exploit the higher levels of traction that are present by reducing the chassis flex. Chassis flex can add traction in low bite conditions, but can reduce response in high bite conditions.

A special manufacturing process means that these 7075 aircraft grade aluminum are extremely strong for their weight. While some chassis stiffeners can bend and lead to a tweaked chassis that you might not notice, these stiffeners from K-Factory will keep your car performing like it should. In addition to the durability, these stiffeners are machined to reduce weight in low stress areas making them a great tuning option to dial your M1 buggy in to the tracks you visit.

Read the rest of this entry »

• Protects 2 transmitters for storage and transport
• Designed to fit all JR DSM systems
• Chrome metal handle with leather insert for durability and great look
• Chrome metal corners and riveted construction for durability
• Scratch resistant finish

Read the rest of this entry »

Team Losi - Main Chassis, Large Servos for RAM,LST,AFT,MG

Source : Horizon Hobby

An explosive start to the Gozo Regional Championship Series 2007 for NOSRAM/DHIracing team driver Carmelo Portelli, who took the honors in the A Main, after earning the TQ position by dominating the qualifying rounds with three consecutive wins.

The NOSRAM .21 Evo suited the open track layout and allowed Carmelo to set the lap record at 36.43 seconds and finish the Main 2 full laps in front of the 2nd place holder. This event was the first in the line of the 10 race Gozo Regional Championship Series and was held on the newly constructed G.M.C.A. offroad raceway.

Source : Nosram

Available in Nov 2007

The Velineon VXL-3s Electronic Speed Control Accessory Cooling Fan reduces temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.

Source : Traxxas

These rear drive cups are engineered exclusively for use with the combination of Traxxas steel constant-velocity driveshafts (#5451R) and the adjustable wheelbase rear suspension arm set (#5333R) on Revo®. These specially designed drive cups help keep the shafts securely in place throughout the huge range of suspension movement and extreme driveshaft angles allowed by the adjustable wheelbase suspension arms. Note: These drive cups should not be used with standard wheelbase rear suspension arms.

Source : Traxxas

• Wheels, Jato Twin-Spoke 2.8″ (Chrome) (Electric Rear) (2)
• Tires & Wheels, Assembled, Glued (All-Star Chrome Wheels, Anaconda Tires, Foam Inserts) (Electric Rear) (1 Left, 1 Right)
• Tires & Wheels, Assembled, Glued (All-Star Black Chrome Wheels, Anaconda Tires, Foam Inserts) (Nitro Front) (1 Left, 1 Right)
• Wheels, All-Star 2.8″ (Black Chrome) (Nitro Front) (2)

Source : Traxxas