Tamiya Japan – Mini Cooper S 2006



Available : Dec 29, 2007

Hot & Sharp

Full model change was received in 2006, in mini-, the top model which loads the direct injection turbo engine, it is the electromotive RC car assembly kit which reproduces Kuu per S. Considered as wherever mini- the unique forum which is understood reality as for the body which it reappears fully polycarbonate make. The air intake and the rear spoiler of the bonnet spirit you make feel. In addition, preparing the door mirror with another part, it tightened style. Setting the 60D radial tire where tread pattern is carved to 8 these spoke wheels. Also the fact that with the running which utilized compact size and lightweight body constitution and brisks, you chase 4 running touring cars and turn is the pleasure.

M03L Drive Chassis

The chassis the actual car loading the motor onto the front in the same way, adopted the M-03L chassis which drives the nosewheel. As for the frame which becomes the framework of the chassis being light weight slim, there is a strength, the resin make monocoque type which also assembly cheapness pursues. Approximately the light running is produced with the double wishbone 4 wheel independent suspension which equips lightweight upright. Furthermore, total 8 equipping 1050 ball bearings which are in the bearing of the wheel axle front and back, you held down drive loss. In addition, to optimize the weight balance left and right, setting steering wheel servo on the centerline of the body, isometric conversion the tie rod. There is no peculiarity and the control characteristic that treats easily is demonstrated.


Basic specifications

  •   Total length 353mm
  •   full-width 169mm
  •   total height 133mm
  •   wheel base 237mm
  •   body weight 877g
  •   tread FR 138mm
  •   tire width/diameter = FR 25/59mm
  •   frame = monocoque type
  •   drive system = nosewheel drive
  •   diff. gear = 3 bevels
  •   steering wheel = isometric 2 divided tie rod systems
  •   suspension = 4 wheel double wishbone
  •   Damper = front and back friction
  •   gear ratio = 5.8: 1
  •   Motor = RS540 type
  •   speed controller = ESC specification (selling separately)

Source : Tamiya

This entry was posted in Tamiya. Bookmark the permalink.

One Response to Tamiya Japan – Mini Cooper S 2006

  1. Pingback: Tamiya Japan - Mini Cooper S 2006 « Rceasy’s Weblog

Comments are closed.