An overwhelming performance to which another is not allowed to come near by all-Japan championship is demonstrated, and the motor for JMRCA new regulation is already appearance in the EXTREME･HURRICANE series that acquires glorious TQ.
The tuning for the race for five cell five minutes that are a new regulations though they are three 3mm core halls and the standard rotor specifications.
The first step to build the advantage starts from the selection of HURRICANE.
- Harricane XX Stock 23T VST (torque type)
- Harricane HX2 Stock 23T VST (High Rev. Type)
Read the rest of this entry »
No Comments »
Available in 6 cells, 5 cells and 4 cells version.
Read the rest of this entry »
No Comments »
Posted by: rceasy in Much More
Our race-tested Ultra Silver X Motor Brush compound is the choice for all 4-5-6cell applications, Both of these models are available as direct replacements for Farrel 23T, Kali modified motors.
For Off road 2WD applications, you can expect more than 40runs without any commutator maintenance with these brushes!
After several runs on these brushes, the motor actually gains power without diminished efficiency!
Precision-molded in Ultra Silver X Motor Brush compounds.
Shunt wires are made of high quality material to handle the high current produced when racing.
Our Motor Brush holder adjustment tool(PN MK-MHA) ensures perfect brush positioning run after run
Source : Much More
No Comments »
Posted by: rceasy in Much More
Sweep Low Height Series Pre-Mount 28 deg & 32 Deg, available with white or yellow rims
Sweep’s Low Height Series (LHS) is new type of rubber tires specially developed for carpet race.
Features :
- Low height designed
- Provides excellent driving feeling on carpet with high traction
- Ultra thin designed for main part for light weight.
- Thicker side wall (than main surface) prevents traction roll.
Sweep LHS tyre will be used as R1 official control tyre.
Source : rcforum.co.kr
No Comments »
Reedy 1600 Series 7.2V 4×2 Micro Pack
Reedy 1600 Series 7.2V Flat Micro Pack
Reedy’s 1600 Series Micro Battery Packs feature high capacity for extended run times while producing maximum power for the latest high performance motors and servos. High output cells, low resistance welded connections, and quality silicone insulated wires prove reliable in even the most adverse conditions.
1600 Series micro packs are available in two configurations with micro connectors for installation in a wide variety of vehicles. With 7.2 volts on hand, high speeds and wicked torque propel your 1:18 scale vehicle to speeds that would make 1:10 scale cars jealous!
Enthusiasts of all skill levels will appreciate the combination of performance, quality, value, and reliability that Reedy’s 1600 series micro battery packs bring to the track.
Read the rest of this entry »
No Comments »
Posted by: rceasy in Spektrum
Voltage Regulator 10A, 6V
Key Features
- Brings higher voltage packs within the operating limits of most servos
- Delivers a steady 6 volts ensuring consistent performance throughout the discharge cycle of the battery
- Includes a fail-on switch and 16-gauge heavy duty input and output wires with EC3 connectors
- Drop in addition for the AR9100
- Cooling fan provides additional current handling capability
- Convenient mounting lugs
Read the rest of this entry »
No Comments »
Posted by: rceasy in Spektrum
LiPo Receiver Pack 6000mAh
Key Features
- Perfect for giant-scale aircraft and model jets that use multiple high-current servos
- Easy-to-use EC3 connector works directly with the AR9100 9-channel receiver and the VR6010 High-Current Voltage Regulator
- The next generation in aircraft power systems
Specs
- Type:LiPo
- Capacity:6000mAh
- Voltage:7.4V
- Connector Type:8″ EC3 for discharge, 6″ JR connector and balance connector for charging
- Wire Gauge:16AWG
- Number of Cells:2 series
- Weight:8.6 oz / 243g
- Dimensions (WxLxH):2.0×2.7×1.5(in) 49×69x37(mm)
- Maximum Continuous Discharge :12C
- Maximum Burst Discharge :18C
- Maximum Continuous Current :48A
Read the rest of this entry »
No Comments »
ST Racing 17/23mm adjustable “Long-neck” Aluminum Wrench Tool
Made with high quality CNC Machined Aluminum, our 17/23mm wrench is a must for serious nitro 1/8th scale truggy and Monster Truck racers. With the popularity of 1/2 “ offset truggy rims (used on Jammin CRT, Losi 8IGHT-T, the new Kyosho ST-RR) we lengthen the neck of the 17mm wrench side to reach into the deeper offset rims while still providing enough room between the handle cross-bar and the wheel for your fingers to get a good grip (and still works great for 0 offset rims and 1/8th buggy rims as well).
The handle cross-bar features a 8mm wrench that is perfect for axle lock nut of Monster Truck owners (Traxxas Revo, T-Maxx, HPI Savage…etc.), and the handle cross-bar is adjustable in length with a simple turn of an installed set screw. While there are many 17/23mm wrench tools on the market, few carries the same innovation, adjustability and most important, the quality that the ST Racing Team Tools offers.
Available in Blue, Silver and Gun Metal
Read the rest of this entry »
No Comments »
Entries (RSS)