Tamiya Japan – XB Plasma Edge

57772logo.gif

57772terms.jpg

57772top.jpg

Available : Mar 1, 2008

Translation :

Buggy 4WD of the enhancement equipment that doesn’t choose the running place
It runs through lightly on the road that gets rough, and completion and electric radio control 4WD that easily handles the Big jump is baggy. It excels in road holding, and length putting motor shaft drive 4WD with high reliability is adopted. Coloring to distribute the checkers pattern to a basic color of silver produces the speed feeling, and the body that stands out particularly in the off-road is a charm, too.


4WD Shaft Drive DF-02 Chassis
Adopting the RC mechanic and low the bathtub frame of center of gravity which loads the battery for travelling onto flat wide-tread. As for suspension 4 wheel double wishbone of long arm. It moves pliantly even in the road surface which becomes rough, high grip goes hand in hand with the pin spike tire and pulls out high traction. In addition, the diff. gear which promises smooth cornering was built in to the gear box front and back. Furthermore, loading the speed controller “Tamiya TEU101BK” whose back travelling is possible in the body including the transmitter of the wheel trigger type which is suited for the operation of the car. Also the 7.2V battery and the private charger for travelling being attached, producing from the box, if it charges the battery, it can enjoy running directly.

Specification :

  • – Total length =400mm
  • – the full-width =249mm
  • – total height =170mm
  • – the chassis material =ABS
  • – suspension = front and back is attached double wishbone 4 wheel independence
  • – the drive system = shaft drive 4WD
  • – 540 type motors,
  • – tire width/diameter = front after 41/86mm 32/86mm

* power source for the transmitter (8 single type 3 electric batteries) the difference sale

Source : Tamiya

This entry was posted in Tamiya. Bookmark the permalink.