Great upgrade for all Losi rough-and-tumble micro vehicles, including the Micro-T, Micro-Desert Truck and 1/36 Raminator.

Key Features

• Two true oil-filled aluminum shock absorbers
• Anodized blue threaded coil-over shock body
• Bladder-sealed shock cap
• Bottom-loading O-ring shock cartridge
• Aluminum shock cap and end
• Tuned springs
• Shock oil sold seperately

Source : Team Losi

Losi CA-Set is specially formulated and packaged for use with cyanoacrylate (CA) type adhesives. CA-Set can be used as a primer or an accelerator without compromising the strength of the bond, even when gluing the most difficult materials. CA-Set is available in a 5 oz. aerosol spray for easier application and greater results.

Key Features

• Works with all types of CA adhesives
• Serves as a primer or an accelorator without detracting from the strength of the bond
• Available in a 5 oz. aerosol spray

Read the rest of this entry »

Oscar and his Italian Teammate Alessio Mazzeo both made the final

The Warm Up for the 1:10 200mm World Championships took place over the weekend at the Lisbon track in Portugal and together with the rest of the Serpent team we where there to gather vital set-up information ahead of the big event. Unfortunately the event was affected by rain which meant grip levels were very bad and we had limited track time.

Read the rest of this entry »

Race report by Ricardo Monteiro
The race event was attended by 52 drivers and there was a lot of expectations for the first battle of this competitive Championship. The track was very difficult with two different types: one with bumpy dirt and the other one with concrete in several places, and to make it even more difficult there was a famous bridge going up and down and a triple jump where several driver left a few car parts behind… definitely a spot where you could win or lose the race.

The first round was won without difficulty by 8 seconds over the second qualifier. In the second round, things got bumpier and the result was awful. In the last round when everything was looking good, a mistake on the triple jump ruined it. With a total result of 3rd in the 3 qualifiers, I was able to start 2nd in the A-main.

Read the rest of this entry »

Race Result on Cactus Classic at Scottsdale R/C Speedway:

Matsuzaki  Hayato 松崎隼人
4WD : Qualify 4 / Race 6
2WD : Qualify 8 / Race 6

Read the rest of this entry »

Race Result on Cactus Classic at Scottsdale R/C Speedway:

Jesse Robbers
4WD : Qualify 12 / Race 13
2WD : Qualify 3 / Race 2
Truck : Qualify 4 / Race 7

Travis Amezcua
4WD : Qualify 8 / Race 5
2WD : Qualify 14 / Race 12
Truck : Qualify 16 / Race 17

Matsuzaki  Hayato 松崎隼人
4WD : Qualify 4 / Race 6
2WD : Qualify 8 / Race 6

Read the rest of this entry »

2008 IFMAR ISTC World Championship Thailand for 1/10 & 1/12.

Apr 25 to 27, 2008 at Bangkok, Thailand.

RACE REGISTER START 

Source : http://www.thailandwc08.com/

Perfect and trouble free brushless stock racing for everyone. The NOSRAM storm evolution spec racing motors combine all brushless advantages with striking simplicity! Stay fast - keep it easy! A colour-coded aluminum ring in the teardown easily shows the number of turns. In addition, the NOSRAM storm evolution spec racing includes a black colour-coded magnet and black motor shaft. This way, the all new NOSRAM storm evolution spec racing motors can perfectly be used for all kind of spec- or stock racing. As the new NOSRAM storm evolution spec racing brushless motors are based on the legendary XTEC X11 modified brushless teardowns, maximum performance and a long life time are guaranteed!

Read the rest of this entry »

Push it to the limit! The P-Max VTEC SC-4600UP Fat Cobra cells get the maximum out of your modified r/c racing car. With a maximum of power and performance over the complete runtime, these cells put you in the winners circle straight away.

•   Top of the line competition cell
•   Maximum capacity
•   Maximum voltage
•   Lowest internal resistance
•   P-Max selection
•   Maximum power over the complete runtime

Source : Mirage Racing

Ultimate solder for the RC professional is 1.0mm thick and 60/40 Sn/Pb. Contains 3.3% flux core. The 3m length of solder is nicely rolled into a tiny tube, yet is easy to pull out through the dispensing hole in the cap

Source : Mirage Racing