Trak Power – LiPo

TrakPower is a specialist involved in the manufacture and supply of extremely high performance Lithium Polymer battery products principally to the RC Model industry.

This LiPo is compatible with practically R/C-cars, replacing a standard 6 cell stick NiMH battery. All TrakPower LiPo’s comes in a ultra premium quality hard case for superior durability. TrakPower LiPo’s are factory matched for low internal Resistance, extrem high voltage and capacity. For more safety during the charging use the V-Balancer by TrakPower.

Features
• Factory Matched LiPo for low IR, high voltage and capacity
• Ultra Premium Quality Hard Cased
• Economical Ultra-Slim leightweight pack
• Compatible with 1/10 scale RC vehicles
• Perfect 6-Cell NiMH to LiPo upgrade
• Massive run-times
• No memory-effect
• Cycle after Cycle of Race Winning performance with no maintenance needed
• 2C fast charging
• TrakPower exclusive embedded gold terminals
• Direct Compatibility with TrakPower V-Balance

TP32002S  TRAKPOWER LIPO 20C 3200MAH 2 CELL
• Capacity: 3200mAh
• Nominal Voltage: 2 Cell 7.4V
• Continuous Discharge: 20C 64Amp
• Peak Discharge: 30C 96Amp
• Max Burst Discharge: 40C 128Amp
• Dimension (LxWxH): 137x47x20.8mm
• Weight: 193g

TP49002S  TRAKPOWER 4900MAH 2S1P 25C
• Capacity: 4900mAh
• Nominal Voltage: 2 Cell 7.4V
• Continuous Discharge: 25C 122.5Amp
• Peak Discharge: 35C 171Amp
• Max Burst Discharge: 50C 250Amp
• Dimension (LxWxH): 137x46x23mm
• Weight: 268g

TP54002S  TRAKPOWER 5400MAH 2S 16C
• Capacity: 5400mAh
• Nominal Voltage: 2 Cell 7.4V
• Continuous Discharge: 16C 86.4Amp
• Max Burst Discharge: 25C 135Amp
• Dimension (LxWxH): 137x46x23mm
• Weight: 268g

TP48002SSP  TRAKPOWER LIPO 20C 4800MAH SADDLE PACK SYSTEM 1 CELL + 1 CELL
• Capacity: 4800mAh
• Nominal Voltage: 2 Cell 7.4V
• Continuous Discharge: 20C 96Amp
• Peak Discharge: 30C 144Amp
• Max Burst Discharge: 40C 192Amp
• Dimension (LxWxH): 70x47x30mm
• Weight: 252g

TPTXX49003S  TRAKPOWER LIPO 25C 4900MAH 3 CELL (TRAXXAS)
• Capacity: 4900mAh
• Nominal Voltage: 3 Cell 11.1V
• Continuous Discharge: 25C 122.5Amp
• Peak Discharge: 35C 171.5Amp
• Max Burst Discharge: 50C 245Amp
• Dimension (LxWxH): 137x46x39mm
• Weight: 415g

TPTXX540003S  TRAKPOWER LIPO 16C 5400MAH 3 CELL (TRAXXAS)
• Capacity: 5400mAh
• Nominal Voltage: 3 Cell 11.1V
• Continuous Discharge: 16C 86.4Amp
• Max Burst Discharge: 25C 135Amp
• Dimension (LxWxH): 137x46x39mm
• Weight: 415g

TPVBAL2S  TRAKPOWER V BALANCER + 2S HARNESS
The TrakPower V-Balance is a safety and conditioning device which connects between your charger and the LiPo pack. This revolutionary safety device contains the rules for safe-handling of LiPo packs in its software. When connected between charger and LiPo, the V-Balance monitors the condition of the cells in the LiPo pack and will disconnect the charger if any one cell is in danger of going over-voltage or under-voltage. Additional functions such as the Fuel Gauge show the approximate state of charge of the whole pack (and each cell on pressing the mode/reset button). The V-Balance also equalizes the state of charge of the cells either passively or during charging.

Features
• 2-6s Balancing capability (2s Harness lead included)
• Up to 10 AMP charge-through /discharge-through balancing (Fused)
• Optically isolated charge state monitoring at cell level / electronic charger disconnection
• Link-Mode (charge through) indicator
• Cell Count/Balancing/Balanced indicators x 6
• Active/Sleep indicator
• Fuel gauge to indicate overall pack voltage (can be toggled to indicate individual cell voltages).
• Multi function switch: Wake Up from Sleep Mode, Toggle Fuel Gauge, Link Mode On/Off
• Software functions: Overdischarged sleep, discharged disconnect Link Mode and sleep, balanced off charge then sleep, full disconnect Link Mode and sleep, overcharged discharge to safe and sleep.

Balance Adaptor

TP2S-BC6 2S HARNESS FOR TRAKPOWER
TP2S-TPTXXVB TRAKPOWER 2S – TRAXXAS V BALANCER ADAPTOR
TP2S-VBALH 2S HARNESS FOR TRAKPOWER
TPCC30 TRAKPOWER 2 X CHARGE LEADS 30CM
TPTXXVBAL3S TRAKPOWER (TRAXXAS) V BALANCER + 3S HARNESS

Source : Robitronics

This entry was posted in RCeasy News and tagged , . Bookmark the permalink.