Available : July 19, 2008
【 ワンメイクレース仕様のカラーリングが精悍 】 2005年から日本で開催されているワンメイクレース、フォルクスワーゲン・ゴルフGTIカップに参加する車両をモデル化した電動ラジオコントロールカーの組み立てキットです。2ドアハッチバックフォルムを実感たっぷりに再現したボディはポリカーボネート製、特徴的なカラーリングはステッカーで手軽に仕上げられます。また、メッキパーツの前後ライトケースに高輝度LEDをセット。ヘッドライト2灯（ホワイト）、テールライト2灯（レッド）のライト点灯が楽しめます。シャーシは組み立てやすさに加えて、コントローラブルな操縦性を発揮するシャフトドライブ4WDのTT-01 TYPE-Eを採用。10本スポークホイールに、トレッドパターンが彫刻されたレーシングラジアルタイヤを装着しました。
Translation :
【Coloring of the one make-up race specification is dauntless 】 It is an assembly kit of the electric radio control car that models the vehicle in which it participates in the one make-up race and Volkswagens golf GTI cup that has been held in Japan since 2005. Coloring the feature ..made of the polycarbonate.. is easily finished up by the sticker the reproduced body of two door hatchback form to enough actually feeling. Moreover, high luminance LED is set in the light case before and behind the plating parts. It can enjoy the light lighting two headlight lights (white) and two rear light lights (red). TT-01 TYPE-E of shaft drive 4WD that demonstrates ..Contororrabl.. control in addition to easiness the chassis to assemble is adopted. Ten racing radial tires to which the tread pattern was sculptured were installed in the spoke wheel.
Adoption shaft 4WD and the TT-01 chassis TYPE-E which raise running
As for chassis, TT-01 TYPE-E of vertical ranging motor [shiyahutodoraibu] 4WD. In the mainframe of bathtub type, equipping the upper deck and the gear cover of the fiberglass strengthening nylon resin, make it guaranteed high chassis rigidity. As for the steering system play to be little 3 division types of movement which is smooth. Low going hand in hand with the center of gravity good balance design and 4 wheel double wishbone suspension and the diff. gear etc which is equipped on front and back, the controller bull you show flight quality. In addition, decreasing number of articles, to assemble it seriously considered cheapness, it decreased the part whose setting is necessary, the body constitution which it is easy to handle charm. It reversed the rear suspension arm, it set the wheel base to 6mm shortening and 251mm vis-a-vis TT-01 TYPE-E of standard type.
Upright
Approximately as for upright strength to be high the TT-01 TYPE-E private part whose abnormal play is little.
Steering wheel
As for the steering wheel of 3 division types using the aluminum pipe for the post. The smooth movement whose play is little is produced.
Damper stay
As for damper stay and gear cover peculiar parts of another body structure. In damper stay damper installation point 2 place installations
Upper deck
Upper deck of fiberglass combination nylon resin make. Chassis rigidity is raised.
[pondasute]
In the upper deck, you can install the stay for the transponder which even the necessity of race can be said.
Rear view
Setting the light/write case of the plating finish to front and back. As the depth impression at the time of LED installation is produced, it radiates the light/write more vividly.
Basic specifications
- 421mm in the total length, width 187mm, and total height 145mm * wheelbase 257mm * section width of tyre/diameter = FR and 27/67mm * frame = bathtub type * drive system =4WD full-time length putting motor shaft drive * Defgiya = back and forth, * steering wheel = Thai rod type * suspension = double wishbone * damper = four-wheel back and forth, and division into three three bevels friction * gear ratio = 8.35:1 540 type * motor = ESC * speed controller = specification
The machine is dressed up in the light lighting that uses high luminance LED
Few of vivid luminescence and current consumption is LED lights of the feature that can enjoy lighting the light by connecting it with Tamiya LED light unit (TLU-01). In the size, two kinds and the colors of 5mm in the diameter and 3mm in the diameter have white, red, yellow, the orange, and blue, and the rainbow type that the luminescence color changes in addition also becomes complete.
Option Parts :
ITEM 54025 (OP.1025)
TT-01 TYPE-E full bearing set
ITEM 54026 (OP.1026)
TT-01 aluminum propeller joint & shaft set
ITEM 53800 (OP.800)
Aluminum toe in rear upright (TT-01 TGS)
Note
You cannot use the part of the below-mentioned 6 points.
ITEM 51002 (SP.1002) TT-01 A part (upright)
ITEM 53497 (OP. 497) TT-01 full bearing set
ITEM 53670 (OP. 670) TT-01 aluminum racing steering set
ITEM 53672 (OP. 672) TT-01 carbon upper frame
ITEM 53694 (OP. 694) TT-01 stabilizer set (front)
ITEM 53695 (OP. 697) TT-01 stabilizer set (rear)
Source : Tamiya
Entries (RSS)