Front and Rear Spring Set for Team Losi 8B/8T

Source : Team Losi

Qualifying heats were held on Saturday, August 16 and a points system was used to determine qualification. After four rounds the qualifying the results for the semi-finals would be determined.

The semi-finals began after a short rain shower that groomed the track well and kept the dust levels down. It almost seemed like it was a battle in the main final and drivers were determined to finish in the Top 5 to secure a place in the main 60min final.

The organizers decided on a 12-car final. After the 60min battle the results were as follows:

1. Glenn Phuah XRAY XB808 (SIN)
2. Meen Vejrak XRAY XB808 (THA)
3. Ben Seet (SIN)

Read the rest of this entry »

AKA products are being shipped out to dealers today (Friday, August 29) to arrive at your local US hobby shops over the next week. The launch proved to be a tremendous success, selling out of virtually all the product in the warehouse. The premium quality tires, wheels and revolutionary inserts are already setting new standards in off-road tires, and the AKA staff is thankful for the overwhelming response from our customers. We apologize for the delay in shipping the product, but the late discovery of the new tire inserts and the huge performance and durability benefits they deliver means you get a superior product and most certainly superior racing results.

Read the rest of this entry »

The Trophy 3.5 is the perfect way to get into nitro 1/8 scale buggy racing! It’s got everything you need for racing fun and bashing convenience, making it the perfect rallycross buggy for jumping right on the race track! It has a fully-featured racing chassis, a rugged competition suspension, all-new racing tyres, the powerful Nitro Star F3.5 (.21 cubic inch) engine and a reliable HPI radio system!

Not only is the Trophy 3.5 ready for the track, it looks amazing, too - with a sleek bodyshell painted with sweet racing graphics and awesome all-terrain rubber tyres wrapped around slick black chrome wheels, the Trophy looks as great as it performs! The high-downforce wing is all-business, and is covered with cool HPI graphics to complete the race-ready look. You can be sure that when it comes to bench-racing, the Trophy will be able to take home top honours!

Read the rest of this entry »

Available:October 2008

When it comes to 1/8th Off-Road, Kyosho is number one in quality and design and nothing has been spared in designing this RTR Truggy.

• World Championship Quality : The suspension features double A-arms, which is the same type of suspension used on the world’s most sophisticated performance machines. It’s adjustable and durable, so you can tune the suspension for better performance and have the confidence that it’s going to hold up even under extreme conditions.
• New Blue 17mm Hubs : New Anodized Blue17mm wheel hubs. Now you can use all standard 17 mmm wheels.
• Endless Adjustments : The suspension and steering linkages feature turnbuckles, which allows for quick adjustments to the camber and steering toe angles. All that’s needed is a 5.5mm wrench to make any adjustment on the spot - there’s no need to detach or move anything to facilitate an adjustment.
• 150cc Fuel Tank : Longer run times are always a plus, and the Inferno ST includes a big 150cc fuel tank for run time of up to 15 minutes. The tank features a quick-fill spring loaded top, so you can refuel while the engine is running so you can race around until the sun goes down.
• New Wing Mount : A new rear wing mount raises the rear wing 18mm and moves it 8mm to the rear, creating more down force for better jumping performance and improved high-speed handling and traction.
• New 4.6 Big Block Engine : Powering the Inferno ST Sport 2 is a big 4.6cc (.28 c.i.) pull start engine (GXR28SG). This new engine features modifications to increase performance and value.
• Full Ball Bearings : Full ball bearings throughout for maximum efficiency through the drive system.

Read the rest of this entry »

CRAFT-RC Mugen starter box decal series have been Released

http://craftrc.com/products_starter_mugen.htm

Losi’s ready-to-run 1/10-scale HIGHroller Lifted Truck is a tough lifted and modified customizable truck with an ultra-realistic look.

Losi equipped the 1/10 HIGHroller with an LM-32K Losi motor and a Losi 12RB electronic speed control (ESC) for the ultimate combination of power and speed. The installed 27MHz Losi radio system provides simple, effective control on any terrain. The easy access battery compartment accommodates 6-cell NiMH battery packs, and allows for quick, simple battery changes.

Read the rest of this entry »

1/8 King Pin Buggy Tire,Red Mounted w/Yel Wheel(2)

Losi has designed the 1/8 KingPin™ Buggy Tires to provide good traction, excellent rough-track handling and a comfortable feel. These tires are available in Losi’s red compound which produces stability, traction and reasonable wear, and come premounted on Losi yellow dish racing wheels.

1/8 XBT Buggy Tire Mounted, Red w/Yellow Wheel(2)

Losi has designed the XBT™ 1/8 Buggy Tires to provide good traction, excellent rough-track handling and a comfortable feel. These tires are available in Losi’s red compound which produces stability, traction and reasonable wear, and come premounted on Losi yellow dish racing wheels.

Source : Team Losi

Losi’s Limited Edition 1/8-scale 8IGHT-E 4WD Buggy Race Roller combines the innovative design and technology of Losi’s award-winning 8IGHT Competition Buggy Chassis with the fierce torque and speed of Losi’s 1/8-scale Xcelorin Brushless Systems.

The 8IGHT-E Race Roller is a competition buggy chassis that has been hand assembled and tuned to exact specifications. Each and every screw is installed to specific torque settings to maintain consistent construction. Additionally, every screw or bolt that secures metal-to-metal contact features thread lock to prevent backing out or loosening due to vibration. The differentials and shocks are pre-built and filled with 100% pure silicone fluid.

Read the rest of this entry »

Size of mat : 65 cm x 120 cm

Source : Mugen Seiki