Team CRC has done it again! We’ve taken the most adjustable and adaptable 10th scale 200mm pan car on the market and raised the bar one step further. Gen-X 10 drivers can now harness the power of brushless motors and LiPo batteries with the greatest of ease on those big, fast asphalt tracks thanks to the 235mm Expansion Kit for the Gen-X 10.

These lightweight hub extensions key into the hubs for a precision, “wobble free” fit every time. They also have a locating ring for the wheel to center on.

As you can see in the photo above, the design of the hub extensions allow for easy access to not only the hub mounting bolts, but there is ample space for your diff wrench as well.

Each hub extension is 15mm wide, bringing your stock 200mm Gen-X 10 out to 230mm. This allows the driver to tune the rear track width with shims to get just the right width for the body of your choice.

Here at the shop, we have actually added a couple of 3mm diff spacers (p/n 4121) and a few shims (p/n 4732) and got the rear width out to 240mm!

Accepts just about any 10th scale wide body made!

The Gen-X 10 235mm Expansion Kit has so much adjustability that you can fit any of the numerous different body sizes out there.

The wide front end plates included in the Gen-X 10 Expansion Kit feature two sets of front end holes. The inner set is for most of the popular 1/10 pan car GTP bodies that taper in at the front such as the 905B from Protoform. The outer set is for wider “nitro car” bodies such as the 235mm Lola from Parma. The wide front end plates also have multiple sets of holes for track width and wheel base adjustment, similar to the adjustments on the stock plates.

Source : Team CRC

This entry was posted on Thursday, August 7th, 2008 at 8:57 am and is filed under Team CRC. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.