New age of DD formula are informed
It is the assembly kit of the electromotive radio control car which can enjoy the sharp running only of DD (direct drive). In order today to reproduce the dimension of [ronguhoirubesu] [narotoretsudo] of F1, loading the battery for travelling onto vertical ranging. The controller bull flight quality is produced with the optimization of weight distribution. As for suspension simple 3P type. Height adjustment is possible by the fact that the front upper arm is mounted, the pyro ball sets the spacer to the top and bottom of upright, replaces. As for rear suspension FRP make T bar and carbon friction plate, combination TRF damper. Furthermore, it was suitable in the name of PRO, the carbon make upper & standard equipped the high functional part of [rowadetsuki], the aluminum diff. housing and the carbon rear shaft etc.

Reality body running production
Reality the polycarbonate body which overflows reproduced also squeezing the rear side which today is the feature of F1 the side pontoon side as another part. Furthermore, the front wing of 3D form and the rear wing which extends to the rear tire rear end, the diffuser, it equips also the side mirror. In addition, the front suspension arm real adheres to expression e.g., it makes airfoil blade section form. In addition, you set the sponge tire which is superior lightly in grip power to the large diameter wheel. Furthermore, although being large diameter, you show to the small diameter wheel by the fact that it raises the rib to the peripheral part, you administer the device which does not impair the scale impression.

The upper arm is mounted, the pyro ball can modify camber angle with the rearrangement of the part, also height adjustment is possible by the fact that furthermore you set the spacer to the top and bottom of upright, replace.

As for diff. housing aluminum cutting make. You produce the smooth differential motion at high accuracy, changing the tire without disassembling.

The vertical ranging battery removes the holder immediately after the steering wheel servo, makes receiver and ESC MOVE which are loaded onto the battery both side slantedly, parallel pulls to slanted forward and pulls out.

Basic specifications
- Total length 410mm　- Full-width 180mm　- Wheel base 270mm　- Tread =F: 150mm R: 145mm　- Tire width/diameter =F: 30/44mm R: 35/44mm　- Frame =CFRP make half double deck　- Drive system = horizontal ranging motor rear direct drive 2WD　- Diff. gear = ball diff.　- Steering wheel = isometric 2 divided tie rod systems　- Suspension =F: King pin [koirusupuringu] R: T bar rigidity　- Gear ratio =4.16: 1 (25T pinion /104T spur-gear use)　- Motor =540 type　- Speed controller =ESC specification (selling separately)

Source : Tamiya

This entry was posted on Tuesday, June 16th, 2009 at 11:12 pm and is filed under Tamiya. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.