MACHINED HI-CLEARANCE LINKS

• Heavy duty machined links add additional ground clearance and strength
• Available in 4 different colors (green, red, blue, and orange)
• Laser etched Axial logo
• Machined slightly shorter than current bent links to allow for more wheelbase adjustments
• Sold in packs of 2

Read the rest of this entry »

AX10 Scorpion Color Packs

• Easily converts your AX10 Scorpion kit or RTR to any of the 4 aluminum colors available
• Includes rear hi-clearance links
• Available in green, blue, red, and orange
• Made from 6061 aluminum
• RTR requires AXA1411 hardware pack – includes all the necessary hardware to update your RTR to aluminum links

Read the rest of this entry »

AX10 SCORPION ARTR (ALMOST READY-TO-RUN)

• Pre-built version of the award winning AX10 Scorpion Kit. Includes all the aluminum links in anodized orange
• Pre-printed orange XC-1 Body that was specifically designed for competition rock crawling - meets 2.2 class rules.
• Pro-Line M2 Hammers tires are designed to resist side-wall tire rollover and utilizes a super soft M2 compound. Pro-Line Memory Foams allow for greater tire flex, added stability, larger contact patch, and less bounce action.
• Rear axle lockouts prevent hang-ups on the rear axle.
• Heavy duty sintered lockers front and rear
• High clearance lower links installed on the rear to prevent hang-ups on the rocks.
• Matte chrome 8 hole beadlocks with orange rock rings. Re-use your wheel. No messy glue required.

Read the rest of this entry »

• Turning angle up to 42 degrees
• Heavy duty hardened steel construction
• No setscrews needed, cross pin held in place by aluminum ring
• Sold in set of two, why buy four when you only need two

Read the rest of this entry »

• Designed from the get go as a competition level rock crawling body to allow clearance where needed when crawling.
• Tapered front and rear end allows more articulation space – Trim the fenders for even more clearance.
• Side skirt acts as a skid plate when on the rocks and offers increased ground clearance.
• Scale looks to real 1:1 rock buggies.
• Extra large photorealistic decal sheet.
• .040” polycarbonate body stands up to abuse from the rocks.
• Offered in clear and pre-printed choices.
• Fits AX10 Scorpion and most 1/10th scale Rock Crawlers.
• Pre-printed bodies include body mounts for use on the AX10 Scorpion RTR.

Read the rest of this entry »

Axial’s new shell looks particular trick with its fold-in sides, and the orange ano is a big departure from the Scorp’s green debut. I’d love to see Axial release a kit with the XC-1 shell and orange bits in the box.

Source : RC Car Action

COVINA, CA - March, 2008 – Moore’s Ideal Products LLC (miponline.com), the manufacturer of the top selling MIP RC car parts, tools, and accessories designed by racers for racers, announced today the release of it’s new stock replacement hop-ups to improve the handling of the increasingly popular radio controlled rock crawlers.

“After months of development, MIP is launching suspension products to handle the most prevalent problem for racers in the crawler market,” says Eustace Moore, Jr., President of Moore’s Ideal Products, LLC. “Top racers frustrated with failing stock crawler parts tested our MIP product and said ‘Finally – it didn’t break’ when their crawler performance got them farther in the race than ever before! We think extending the tremendously popular MIP CVDs to crawlers such as the Axial Scorpion will raise the already high level of competition with our latest products engineered to maximize the stability and performance of these scale model rock crawlers.”

MIP’s RC Hop-Ups Catalog is a great parts resource for RC Crawlers and RC Cars:

• #08100 CVD™ FT&RR Set for Axial AX10 Scorpion (4) $59.00
• #08101 C-Drive Spline Set for Axial AX10 Scorpion (2) $59.00

Technical information

• The C-Drive has 5mm bore at each end & min. working length of 4”
• .350 & Max working length of 5”.350 from end to end.

Source : RC Car Action

• Designed from the get go as a competition level rock crawling body to allow clearance where needed when crawling.
• Tapered front and rear end allows more articulation space – Trim the fenders for even more clearance.
• Side skirt acts as a skid plate when on the rocks and offers increased ground clearance.
• Scale looks to real 1:1 rock buggies.
• Extra large photorealistic decal sheet.
• .040” polycarbonate body stands up to abuse from the rocks.
• Offered in clear and pre-printed choices.
• Fits AX10 Scorpion and most 1/10th scale Rock Crawlers.
• Pre-printed bodies include body mounts for use on the AX10 Scorpion RTR.

Read the rest of this entry »

•  Includes 3 distinctive rear exhaust headers (medium torque, high torque, and high speed) so you can fine tune the performance to your driving style. Maximize your performance for any track or motor.
•   Made from strong lightweight 6061 Aluminum and polished to a mirror finish.
•   Reinforced stinger for added durability for those brushes with the board.
•   Fits most 1/10th scale sedan and gas trucks.
•   Side set screws for tightening down the pipe for easy maintenance access.
•   Includes all hardware for installation.

Source : RC Car Action

Purpose built for the Rocks! Going Places Where Others Can’t.

Based upon the very popular competition ready AX10 Kit, the AX10 Scorpion is a Ready-to-Run with 2 configurations!

• Rock Crawler: Takin’ it slow - swap out the 20t pinion to the 14pt pinion and install the front locker (parts included). The Rear locker is already installed. This will give you true crawling performance.

• Rock Racer: Attack the rocks at full speed out of the box.

Read the rest of this entry »