Turbo30 Turboflex - (9 buttons), A program version is available that removes the charge mah output limit. This makes the T30TF compatible with all sizes of Nimh and Nicd batteries. It is an Eprom chip in a socket that you can install yourself. Cost is $25.00 plus shipping.

Source : Competition Electronics

The most advanced R/C racing charge/discharge system on the market now features Lipo capability. Re-match your packs or see which pack will give the best performance. With the GFX backlit graphics display you can see charge and discharge curves on screen. You can also see more information at one time so there are less menus to cycle through. The rotary dial makes it easy to change values and select functions.

GFX Features:

• Large backlit graphic display
• Rotary dial and intuitive menu system
• Readings compare directly to battery labels, discharge time, ave. volts, cell resistance and more
• 1 to 3 cell Lipo packs
• 1 to 8 cell Nimh/Nicd packs
• .1 to 12 amp charge range for Nimh/Nicd mode
• 500 to 12,000 mah charge range for Lipo mode
• .5 to 35 amp discharge range
• 20 amp capacity variable motor run mode
• Preset time before charge begins
• Change the charge rate with the rotary dial during operation
• Get on screen charge and discharge curves real time or after the cycle is complete
• Name and save up to 5 setups in Nimh/Nicd mode
• Name and save up to 5 setups in Lipo mode

Source : Competition Electronics

Replacement part for the Turbomatcher 8 or use with the Turbo 35 charger for connection to single cells without soldering. Replaces previous model CEI-2090

Specifications:

Features:
Adjustable for SUB-C, AA, 2/3A, and AAA sizes
Rated up to 40 amps
Lever release for easy loading/unloading
Mounts to a flat surface
Separate voltage sensing contacts

Source : Competition Electronics

The Turbo 35 GFX has been updated to include Lipo battery charging and discharging while still retaining the Nimh/Nicd operation.

• -The program update is available for all GFX units as an upgrade. The unit must be sent back to our facility for reprogramming.
• -Cost for the update is $50.00 plus shipping. We prefer to call you when it is done for payment. Visa/Matercard accepted.
• -Units will also be tested for calibration and operation.
• -A seven page addendum to the operating manual is included, please read it carefully before using the unit. You may also download it on tab below.
• -Turn around time is approximately one week.

Download the Manual

Source : Competition Electronics

Features:

• Based on switched mode technology.
• Compact and lightweight.
• High efficiency and less heat dissipation.
• Protected against short circuit, over current and over voltage.
• Forced air cooling and over temperature shut down.

Read the rest of this entry »

New for 2007, TURBOMATCHER 8

Individual cell grading Machine.

Read the rest of this entry »

Read the rest of this entry »