A 3PM for Cruising, Crawling and Crushing!

The Futaba 3PM-X 2.4GHz FASST Radio eliminates the need to have one radio for racing, another for rock crawling and yet another for monster trucks.  The 3PM-X is the single, affordable system that can handle them all!  It retains the features of the popular 3PM while adding performance and programming pluses that expand driving fun – all with the security and dependability of 2.4GHz FASST technology!  Now modelers can set up a two- or three-position switch to control the dig function on their crawler while, with just the push of a button, they can access normal, crab, front-wheel only or rear-wheel only steering modes.  No other surface radio is as versatile as the 3PM-X!

• Four-wheel Steering Mix – switch between crab, all-wheel steering, front-wheel only or rear-wheel only, with just the push of a button.
• Digital Trim Steps – choose a level of trim adjustability, from fine-tuning finesse (1) to maximum travel (16).
• Adjuster Function – keep throttle and steering throws as well as centering at programmed ideals for optimum performance.

Source : Futaba

Share on Facebook

A 3PM for Cruising, Crawling and Crushing!

The Futaba 3PM-X 2.4GHz FASST Radio eliminates the need to have one radio for racing, another for rock crawling and yet another for monster trucks.  The 3PM-X is the single, affordable system that can handle them all!  It retains the features of the popular 3PM while adding performance and programming pluses that expand driving fun – all with the security and dependability of 2.4GHz FASST technology!  Now modelers can set up a two- or three-position switch to control the dig function on their crawler while, with just the push of a button, they can access normal, crab, front-wheel only or rear-wheel only steering modes.  No other surface radio is as versatile as the 3PM-X!

• Four-wheel Steering Mix – switch between crab, all-wheel steering, front-wheel only or rear-wheel only, with just the push of a button.
• Digital Trim Steps – choose a level of trim adjustability, from fine-tuning finesse (1) to maximum travel (16).
• Adjuster Function – keep throttle and steering throws as well as centering at programmed ideals for optimum performance.

Source : Futaba

Share on Facebook

When Futaba introduced the first brushless servos in 2007, they set a standard that no one else has approached.  Since then, Futaba has been improving upon the same technology and expanding the line to meet most any modeler’s need.  That same commitment to excellence also applies to the MC950CR – the brushless ESC with the features that racers want most.  In fact, Futaba brushless electronics are winning over modelers all around the world!

MC950CR Brushless ESC:

• Extremely adjustable, with the ability to change parameters through your transmitter – no laptop needed
• Large, isolated solder posts for quicker, safer wire attachment
• Features an aluminum case, plus heat sink with removable fan

Source : Futuba

Share on Facebook

The stylish way to transport and protect the 4PK transmitter.

The rugged brushed aluminum exterior and custom-fit foam padded interior safeguard the Futaba 4PK system from damage, dirt and trackside debris. An extra cutout provides room for storing radio accessories. The case features two lockable latches with 2 keys included.

Dimensions: 15.1 x 8.25 x 10.4 in (385 x 210 x 265 mm)

Source : RC Car Action & Futaba

Share on Facebook

Big muscle for controlling big models!

Unbelievable power and performance in a standard sized servo with a whopping 425 oz/in of torque and a speed of .14, the S9157 is the servo choice for Scale Aerobatic aircraft and other large airplanes. Featuring metal gears, ball bearings and a coreless motor in an aluminum center case, the S9157 servo can also be used as a steering servo in monster trucks and 1/8 scale buggies and crawlers.

Specifications:

• Torque: 425 oz-in (30.6 kg-cm) @ 6.0V
• Speed: .14 sec/60°
• Dimensions: 1.59 x .83 x 1.47 in (40.5 x 21 x 37.4 mm)
• Weight: 2.5 oz (71 g)

Source : RC Car Action & Futaba

Share on Facebook

Source : Team Miyazaki

Share on Facebook

4PK – 4 Channel 2.4GHz Computer System

The new flagship in surface systems.

The design goes beyond stylish; the 4PK is also very well-balanced and ergonomic. The transmitter weighs only 1.5 pounds, which racers will appreciate at the end of a long, grueling main, and you can also position the wheel and adjust the trigger location to perfectly fit your hand and your type of driving.

While driving, you’ll enjoy performance pluses such as built-in 40-model memory, 10-character naming and super-sensitive 2048 resolution, to name just a few. Because the 4PK was designed as a native 2.4GHz spread spectrum system, there’s no need for a separate module to worry about, a state-of-the-art receiver is included, and all of the incredible benefits of Futaba’s FASST system technology are at your command.

Read the rest of this entry »

Share on Facebook

Source from www.rc50.com the Futaba 4PK appearance at 2008 snowbirds race.

Read the rest of this entry »

Share on Facebook

Futaba – 4PK 2.4GHz – Tokyo Hobby Show 2007 – Photo by Roche

Read the rest of this entry »

Share on Facebook

Souring from Big Squid RC have great picture for Futaba 4PK 2.4GHz and also gallery for the 2007 IHobbyExpo 2007.

Read the rest of this entry »

Share on Facebook