100% Pure Silicone
K Factory shock oils are made from 100% pure silicone oil with no additives or fillers to degrade performance. Unlike carbon based oils, silicone oil is non-flammable, temperature-stable and won’t attack your shock’s rubber o-rings or plastic parts.

Protecting the inner components and seals means your shocks won’t leak and thus render them ineffective. The K Factory shock oil stays in while keeping the enemy, air and dirt out.

Superior Quality
Viscosity (thickness) is what makes shock oil tunable for the driving conditions and demands of each individual race track. K Factory’s superior shock oils maintain viscosity even in hot weather when other oils may thin out.

The high quality you have come to expect from all of K Factory’s parts and equipment is built–in to our performance grade shock oils.

Clearly the Best
Each 2.5 oz bottle of K Factory’s shock oil is clearly labeled for easy selection, perfect for your touring, on-road or off-road vehicle. K Factory shock oils are available in 200 to 700 with 50 increment.

Source : K-Factory

In standard conditions the E4 is a super strong car, capable of taking a pounding and coming back for more. There are however, times when track conditions are far from normal and certain boards or parts of the track maybe getting little too close for comfort. Thankfully, K-Factory is here to offer some assistance with this issue.

Read the rest of this entry »

K Factory - HiFL Offroad Dual Intake Air Filter (for 16mm carburetor)

The performance and life of any engine is directly affected by how clean you keep it and how much your engine can breathe. In the dirt pounding, hard driving arena that is off-road racing, keeping your engine dirt-free while increasing air-flow is not just a good idea… it is a prime objective.

That is why K Factory engineers have developed the most efficient and easy-to-maintain off-road air filter you can buy for your off-road engine.

The K6414 HiFL Off-Road Dual Intake Air Filter is a marvel of innovation that will protect your investment by keeping the dirt out and the air flowing through your precision tuned RC engine.

Read the rest of this entry »

K6505 Clutch Bell

If there is one component on your truck buggy or car that is solely responsible for transferring power from your engine to your transmission… it’s your clutch.

Therefore, choosing the right clutch bell is a decision you should not leave to chance. Choosing the wrong clutch bell can mean overheating, metal fatigue, clutch shoe slippage and outright meltdown. You may as well strap a brick to your vehicle because it’s going nowhere fast.

Read the rest of this entry »

Extremely powerful brushless motors and high voltage LIPO batteries are revolutionizing the R/C racing industry. Cars are substantially quicker then their brushed motor equivalents and the new battery technology means the cars are run for longer at these high speeds.

Unfortunately, the downside to this new technology is the additional stress placed on the transmission of the latest touring car chassis. Only a short while ago manufacturers were trying to lighten drive train parts to improve acceleration and top speed but it appears, although successful for the brushed motors, the new brushless motors are causing premature wear and sometimes breakages.

K-Factory is always paying close attention to the industry and has developed a new set of high strength universal joints for the Team Magic E4 series of electric touring cars. The improved strength comes from the use of specially developed K-Factory ST-Steel and an increase in drive shaft thickness.

The thicker and stronger UJ combines with a lightweight aluminum wheel adapter which helps reduce the overall weight and keeps the rotating mass of the E4 transmission as low as possible.

Source : K Factory

Spec ：

• K6330-1000 #1000
• K6330-10000 #10000
• K6330-2000 #2000
• K6330-3000 #3000
• K6330-30000 #30000
• K6330-5000 #5000
• K6330-50000 #50000
• K6330-7000 #7000

Read the rest of this entry »

Off-road track surfaces can change at an amazing rate. One hour it’s dusty and track grip is very low. Then the next, a small amount of rain falls, grip levels sky rocket and you’re immediately searching for ways to utilize this new found traction. Sound familiar?

Varying grip levels, especially when it’s high, can place a large amount of strain on the drive-train of any off-road buggy or truggy. One part in particular which takes a severe beating during a race, but is often over-looked, is the clutch.

Read the rest of this entry »

K Factory - TC 2 Motor Cooling Head & Fan Set (with Thermal Pad)

One of the main aims of electric racing is to keep the temperature of your motor down. Reduced temperatures result in increased power, better performance, and longer motor life. This has become especially important with the use of brushless motors were an overheated motor can cause the speed controller to thermal and cut-out causing your car to stop in that all important A-final. The best way to keep the temperature down is with a heat sink and fan.

K Factory have released the K7102 TC 2 Motor Cooling Head & Fan Set. This is very similar to K Factory’s K7101 TC Motor Cooling Head . But it has four small screw holes in it . The addition of these screw holes allows you to install one or even two fans on top of the heat sink to blow cold air directly down onto your motor.

Read the rest of this entry »

G4 Carbo Side Plate Left (G4S/+/RS/JS/All RTR)

The K Factory Carbon Fiber Left Plate is designed with the same meticulous attention to detail and quality, as are all of K Factory’s parts

Designed to fit all of the Team Magic G4 Series models, the Left Side Plate, along with the other chassis components transform the G4 chassis from a collection of individual sections into a single incredibly strong yet lightweight frame.

Read the rest of this entry »

K Factory - LX Touring Shock Spring Set 13×23.5mm (#21~#30)

Selecting the correct suspension settings for certain track conditions can be as important or as critical as your tire selection. The combination of spring for rebound and viscosity of oil for dampening are responsible for keeping your tires in contact with the road as often as possible. So even if you have the best tire for the job, it’s ability to grip the road relies on your ability to provide the ideal spring tension.

K-Factory has developed a new set of high quality on-road touring shock spring’s for any track conditions you may experience. They are made from high quality steel and designed to fit almost every touring car chassis on the market, they are the ideal addition to any racers pit box. In addition, each pair of spring is marked with number for easy and quick identification.

Read the rest of this entry »