•  It is a power-up in all from low speed to high speed.
•  Achievement of high fuel cost
•  Wear-out is prevented, and an excellent lubricant in the liquidity
  that doesn’t overheat easily is contained.
•  The carburetor needle adjustment is easy compared with the weather
  change.
•  Sealing up cap that keeps fuel fresh up to the last one drop
•  Orange with good visibility
•  Nitro methane 30% and 1-gallon (3.8 liters) insertion

Source : Mugen Seiki

Pro Spec Hex Wrench Set

• 1.5mm Hex. Wrench (B0523)
• 2.0mm Hex. Wrench (B0524)
• 2.5mm Hex. Wrench (B0525)
• 3.0mm Hex. Wrench (B0526)
• 2.0mm Ball-Hex. Wrench (B0527)
• 2.5mm Ball-Hex. Wrench (B0528)

Read the rest of this entry »

Mugen introduce the new 2008 Winter jacket series with Jacket and Pants for 2008. Item will be available on Dec 26, 2007

Source : Mugen Seiki

R/C Carrying Bag 2L (Light Gray) 4 Drawer

• RC Carrying Bag with 4 plastic drawer.
• Plastic inner case (size of inside : 530mm x 305mm)
• 2 different depth of inner case (160mm : 1 pc, 100mm : 3 pcs)
• The above opening cover with strong fastener.
• New Light gray color

Source : Mugen Seiki

To the problem-free installation and removal of clutch liners MID presents this from ALL MOD particularly developed assembly tool. Worked satisfactorily All MOD tool quality The grasp is formed ergonomically, the employment is manufactured out of high-strength steel. By tricks of the employment it knows both for the MSS-MK1 (type 26) as well as for the MSS Heavy load (type 28) system to be used.

Source : Mugen

B0429 : Al. Servo Horn + Set of plastic parts for each servo
B0430 : Only plastic parts

+ A more direct reaction can be obtained and the steering retentively is improved.
+ For all our models (MRX/MTX/MBX Series)

Source : Mugen

Details of MRX-4X

• Rear Upper Arm (2mm Shorter)
• Brake Bracket & Rear Upper Arm Mount for short rear upper arm.
• Rear upright (Adjustable wheel offset)
• Front bulkhead. You can change the tension of the belt (5 different positions).
• Rear bulkhead. You can change the tension of the belt (5 different positions).
• New Eccentric Hub.
• 5mm New Rear Lower Arm Mount
• New Battery Holder (FRP) & Chassis
• New Long rear body Mount Arm & Rear Body Mount Centering Parts
• New Damper End Parts & Rear Damper Case as same as front.
• F/R Damper Stay, Al. Spacer for rear wheel offset, Decal, Set-up sheet are included.
• New Clutch System (3 pcs Centrigugal Shoe, Aluminum Pressure Plate)

Read the rest of this entry »

B0535 M3 nut (opposite side 5.5mm) : Optimum to the damper removal and re-installation of MBX5R and MBX-5T etc
B0536 M4 nut (opposite side 7.0mm) : Optimum to wheel removal and re-installation of the touring car of MTX4R and the like

* As for the advanced part the coating whose durability is high is administered.
* As for grip because of duralmin make super light weight.

Source : Mugen Seiki

Novarossi Asian Cup 2007
September 1-2, 2007 at Titwangsa Raceway, Malaysia

Read the rest of this entry »

Battery holder of the carbon fiber make. Chassis rigidity to rise FRP make compared to, in the steering wheel and throttle operation. Confronting, the reaction of the car improves.

* This product the chassis for MRX-4X (H0475) is exclusive use.

Source : Mugen Seiki