Brushless racing is within your grasp with Novak’s Havoc Sport Sensored Brushless System. Though the sport system offers the same great features found in all Novak motors and speed controls, it exceeds expectations with its performance and unmatched affordability. The 540-sized motor is equipped with a sintered rotor for precise throttle response and resistance to high temperatures, and is sensored for low-speed driveability and consistent brakes. The Havoc Sport Brushless/Brush ESC contains one of the strongest BECs for sport applications and includes nine adjustable parameters to fine-tune brake and throttle response. Combined, the Havoc motor and speed control promote the fastest racing times for any comparable system. Also, its small footprint and low cost make it a perfect complement to Traxxas’® Slash Pro 2WD Short Course Truck™, HPI’s® E-Firestorm 2WD 1/10th Stadium Truck™, Kyosho’s® LAZER ZX-5 SP™ and other 1/10-scale off-road and on-road vehicles. In short, the Havoc Sport Sensored Brushless System is smaller, stronger, faster and, most importantly, the most inexpensive sensor-based system available.

Read the rest of this entry »

With input from the top drifters of the world, Novak has developed the specially designed SLYDR Brushless Drift System (#3066-3068). This system includes the new SLYDR Brushless Drift ESC (#1712) factory-wired to one of three, new Novak Drift-Spec Brushless Motors (#3466-3468). These 540-size sensored brushless motors include the Novak 13mm Neodymium Sintered rotor for improved initial throttle response and natural drag brake. The SLYDR Drift ESC, which is based on Novak’s GTB, contains new brake adjustments and features to help fine tune brake response, as well as all new throttle curve adjustments to further customize the already-smooth throttle response.

SLYDR BRUSHLESS DRIFT SYSTEM WINDS
Novak’s SLYDR Brushless Drift Systems are available in three motor winds:

• SLYDR Brushless Drift System – 6.5T (Kv=5,700; Watts=370) provides the most power to light your tires up and excels on large tracks (#3066).
• SLYDR Brushless Drift System – 7.5T (Kv=5,200; Watts=340) is the best all-around-motor with a great balance between power and run time. It also works well on medium-sized tracks (#3067).
• SLYDR Brushless Drift System – 8.5T (Kv=4,500; Watts=280) has the smoothest power response and longest possible run time. The 8.5T is also ideal to use on small tracks (#3068).

Read the rest of this entry »

Novak has reinvented the HV Pro High-Voltage Brushless ESCs yet again since it was released in 2006. The series now includes new programming, built-in Li-Po Cut-Off Circuitry and a design makeover. The updated HV Pro ESCs were specifically developed by Novak for R/C cars, and are ideal to power monster trucks — such as the Traxxas® E-Maxx™ and E-Revo™ — converted electric 1/8-scale vehicles and vehicles with massive power needs.

HV PRO BRUSHLESS/BRUSH ESC
Completing the HV Pro Brushless System is the fully programmable HV Pro ESC, which can accommodate 6-14 Ni-Cd/Ni-MH cells (7.2-16.8 volts) or 2S-4S Li-Po and can be wired for dual or single battery packs. This high-power, reversible brushless speed control is also easy to install and operate. The HV Pro uses the same screw pattern as the Traxxas® E-Maxx™ and E-Revo™, making it convenient to install, and it includes a Power-Boost ESC Cooling fan kit and factory-installed motor heat sink for superior cooling.In addition, the HV Pro High-Voltage Brushless ESC includes many of the same great features found in high-quality Novak ESCs, such as One-Touch Set-Up, Thermal Overload Protection, a powerful BEC, Polar Drive and Digital Anti-Glitch circuitries and Smart Braking II.

Read the rest of this entry »

Novak has entered the pinion gear business and is pleased to announce that it now has four series of gears:

5mm 32-pitch Steel Pinion Gears (12T-17T): can be used to power monster trucks that use a 32-pitch plastic spur gear [click here for more info!]
Mod 1 Steel Pinion Gears for 5mm Shafts (9T-16T): are recommended for Novak’s 1/8-scale Brushless Conversion Kits [click here for more info!]
Mod 0.6 Aluminum Pinion Gear Sets (11T-19T): fit seamlessly with Novak’s Three-80 Micro Pro Brushless Motor [click here for more info!]
Mod 0.5 Aluminum Pinion Gear Sets (11T-19T): also work great with Novak’s Three-80 Micro Pro Brushless Motor [click here for more info!]

Source : Team Novak

Now, you have one more reason to go to your local hobby store:
Novak is shipping Sentry Data Loggers!

The two versions of the Data Logger — the Sentry Data Logger (#2000) and the Sentry Data Logger-Pro (#2010) — both include multiple sensors that record data from multiple parts of your R/C car. The Sentry Pro includes four extra Digital Sensors and Expander Board, and Current Sensor.

Simply plug it in, and the Data Logger will measure and record information from several tiny sensors placed all over your R/C car!

Read the rest of this entry »

The wait is finally over! You can now find Novak’s 10, vehicle-specific Brushless Conversion Kits and its specially designed Mongoose Systems, Motors or Speed Controls at your local hobby store.

With some basic assembly, you can convert your a 1/8-scale nitro car into a leaner, cleaner, less noisy brushless car with faster acceleration and speeds comparable to nitro.

And don’t forget the Mongoose’s Three-80 Micro Pro motor is the first sensor-based brushless motor that is specifically designed for 1/18 and 1/16-scale cars.

Source : Novak

Novak was proud to be one of the sponsors of the **All-Star Shootout**, which took place on the weekend of May 17 & 18 at the Encino Velodrome. Saturday’s races followed the standard series format, while Sunday had a special all-star format. Racers from all over California came out to compete for cash and prizes, including a number of Novak accessories, a GTB Programmable Brushless/Brush ESC and a SS17.5 Pro Brushless Motor!

Stay tuned for a complete race report coming soon!

For more information about the **All-Star Shootout**

Source : Novak

HV MOTOR WINDS
Novak’s HV Brushless Motors with 5mm Shafts are available in four motor winds:

• HV4.5 High-Voltage Brushless Motor with 5mm Shaft is best used for short, high-speed runs (#3524).
• HV5.5 High-Voltage Brushless Motor with 5mm Shaft has superb control, and excels in racing and bashing applications (#3525).
• HV6.5 High-Voltage Brushless Motor with 5mm Shaft is the best all-around-motor with a great balance between power and run time. It also shines in racing and bashing applications (#3526).
• HV7.5 High-Voltage Brushless Motor with 5mm Shaft has incredibly smooth power delivery, making it the easiest to drive, and is recommended for users looking for the longest possible run times (#3527).

Read the rest of this entry »

For increased durability, Novak is offering an HV Brushless Motor 5mm Upgrade Kit to specially equip your existing 4.5 and 6.5 HV High-Voltage Brushless Motor with a sturdy 5mm output shaft. The existing output shaft on the HV motor is the industry-standard 1/8”, but upgrading to the 5mm rotor can increase a motor’s resilience and race life. This heavy-duty upgrade kit includes a Nickel-plated, high-strength, sintered rotor featuring a 5mm output shaft to decrease the likelihood of damage to the shaft in harsh driving conditions, and a front endbell and bearing replacement that is specially designed to accommodate the larger diameter output shaft.

Read the rest of this entry »

ROAR recently announced that 17.5-turn brushless motors have been approved for their Stock class. In addition, ROAR announced a name change for the 19T Class. It will now be known as the Super Stock Class, and will allow 10.5 and 13.5-turn brushless motors.

For more information on ROAR’s rule changes for 2008, [click here!]

Source : Novak