AKA Racing announces new FlexFit-brand hats embroidered front and rear with the distinctive AKA logo. FlexFit hats feature a patented design that includes revolutionary “poly-weave Spandex” and high-quality construction that features a moisture-absorbing headband. AKA hats are available in two sizes: S/M and L/XL.

AKA98102 - AKA FlexFit hat - L/XL
AKA98102SM - AKA FlexFit hat - S/M

Source : RC Car Action & AKA Racing

CROSS Japan have release the all new F1 Hight Type Body (with Hemlet)

Source : CROSS

TRG Japan have announced to develop the new modern F1 Body for Tamiya F103.   The new F1 Body will be matching the modern F1 body for spcialized aerdynamic and outlook.   Will be available in Nov 2008.

Read the rest of this entry »

Ultimate Racing is pleased to announce that after test some UR products the American top drivers of Losi and GRP Adam Drake and Mike Truhe have decided to join the Ultimate Racing Team.

They will be using some UR products like the wheel balancer, balancing gum, light and closed BS wheel nuts, special pin grease, green clean, aluminium washers and nuts, antenna tubes, among others that do not conflict with any of the current products of their main sponsors.

Source : Ultimate Racing

Torx Button Screw
M3 x 4
M3 x 6
M3 x 8
M3 x 10
M3 x 12
M3 x 14
M3 x 16

Torx Flat Screw
M3 x 4
M3 x 6
M3 x 8
M3 x 10
M3 x 12
M3 x 14

Source : Hiro Seiko

Not just another ‘conversion’, the Tekno RC V3 Brushless Kit is a total electric transformation! Featuring the first commercially available 1/8th scale electric specific chassis along with Tekno RC’s innovative patent pending Elektri-Clutch system. This is the kit everyone has been waiting for:

• Factory Finish - hard anodized chassis, black anodized and injection molded components
• Lowest CG of any conversion, provides better handling and higher capacity batteries
• 4mm 7075-T6 CNC hard anodized chassis - only the best, no stamping here
• No extra holes, no drilling, no mods - designed for electric racing by electric racers
• Patent pending Elektri-Clutch system to tune the power delivery of the hottest brushless motors. Our hardened steel clutchbells will last and last because the motor is disengaged from the drivetrain off power. For those that prefer direct drive, our kits are compatible with long shank 5mm bore mod1 pinions as well. More options and flexibility than any other kit on the market.
• Patent pending 1-piece motor mount/heatsink fully supports your motor and provides superior cooling under the most rigorous conditions. Need more cooling? Slap a 40mm fan on the integrated fan mount
• Mechanical brakes with front/rear brake bias provides world class handling while lowering operating temps and easing the stress on your motor, ESC, and drivetrain
• Optimized left-to-right and front-to-rear weight balance - battery is as close to center as possible for the best handling of any electric 1/8th scale on the market
• Included radio tray keeps the wires neat and features an integrated transponder mount
• Low CG battery tray keeps the battery protected while allowing the most height clearance of any setup on the market
• Proven tough Tekno RC battery strap system WILL protect your batteries and will NOT break
• Servo mounts feature integrated cable guides to keep your servo wires neat and away from hazardous moving parts
• Includes full Tekno RC Elektri-Clutch setup - adapter, compact flywheel, collet, clutch nut, clutch shoes, clutch spring, clutch bell and bearings, an unbeatable value
• Custom chassis mud guards keep the dirt away and finish off the factory quality kit
• Tekno RC - No compromises!

Read the rest of this entry »

It is possible to use it by various scenes by putting on the rally block in the on-road putting on tire “KAMIKAZE-SLICKS” for Pal’s mini in the off-road. Moreover, it is possible to install it also in the crawler of 2.2-inch size by changing the cutline.

Read the rest of this entry »

• Designed for Losi 8ight 1/8 Off Road Chassis.
• Provide extra front down force and low profile rear end to give more cooling space for engine.
• Made by 1.0mm PC . Clear Un-Cut Body shell.
• Can be use Both GP and EP brushless version Losi 8ight.
• Kit included windows mask and decal.

Read the rest of this entry »

More new Li-Po batteries from RC specialists FTX. If you haven’t experienced the power of Li-Po’s for yourself yet it’s time to make a change.

A 4800mah saddle pack configuration is available for vehicles such as the B44.

In addition high capacity receiver Lipo battery packs are available to suit hump and straight style applications, as well as 1/18th vehicles such as FTX Blaze, AE RC18T.

Source : CML Distribution