Robitronic’s aluminum servo arms are designed with clamp-on style mounting system. The two side screws will clamp onto the sevo tab along with the top screw. This prevents the servo arm from coming loose during high stress situation. They are perfect for rock crawler steering setup.

Specifications:

• Anodized Red
• Laser Etched
• Fits Futaba, Airtronics, KO, JR, and Hitec servos

• R17001 - Robitronic Aluminum Servo Arm (Airtronic, KO, Sanwa, JR)
• R17002 - Robitronic Aluminum Servo Arm (Hitec)
• R17003 - Robitronic Aluminum Servo Arm (Futaba)

Source : Robitronic

Zigfacher junior and youth champion, German champion, European champion,… when the RC-car field for off-road, then Joern Neumann is always a very hot candidate for the victory!

The Robitronic Racing team is delighted that this highly exceptional talent in his ranks warm welcome. From now on in the classroom Joern MT8 Truggy the already proven and highly successful 8IGHT-T LOSI from the house, to be sure to further the success story of this huge racing car passing.

Source : Robitronic

“Perfect Start
specifically for buggies & Truggys …!”

To narrow, too short, simply not enough power for potent nitro engines…?

Nervige problems when you start your buggy 1:8 or Truggys…?

This is now final!

The new Robitronic special box was consistent starter for the requirements of off-road category Nitro is designed and produced high-quality form. The MONSTER starter Box in the Starter boxes! No more sore fingers to Seilzugstartern, durchrutschenden free runs within various e-start systems and shaky, untermotorisierten starter boxes, which actually only reason for the filigree on-road use has been interpreted. Robitronic, the new starter Monster Box ready for you!

Read the rest of this entry »

“Light, the best protected and powerful!”

LiPo batteries of the future in all areas of life and this performance will also wonder the history of the model building rewrite.

Robitronic now offers the extremely compact “LiPo in the Box”, whereby the use of these battery technology in the hard RC-car practice problem. A tough, widerstandfähige plastic protects the cells from damage and ensures a unique operational safety. Despite this “protection Ummantlung” is the Robitronic 5200 LiPo pack from its dimensions no larger than comparable LiPo battery box, or without traditional 6 Sub C cell packs.

Thanks identical dimensions, the new Robitronic LiPo without modifications, directly into any standard RC car can be used. His higher voltage provides more power, the greater capacity for longer journey times and his sharply lower weight again for more power. Thanks to short trade routes Robitronic is also capable of these high-quality battery to a very attractive price to be able to offer.

Source : Robitronics

The Overloader2 is a high performance computerized battery maintenance system. Capable of charging, discharging, cycling and conditioning multiple rechargable battery types, with very high output power, a customized display with expertly designed software and programming controls.

Features
• Perfect for electric cars, trucks, boats and planes
• 1-12 cells charging & discharging (for Glowstarter & Batteries for planes)
• Handling NiCd / NiMH / Li-Po / PB / Lixx battery types
• Graphical display show charge, discharge and cycle curves
• Storing up to 10 different battery configurations
• Performs 1 - 10 cycles for NiCd / NiMH only, and stores capacity and voltage date
• Break-in electric motors or operate commutator lathes
• Heat glow plugs for nitro engines
• Operate tire warmers
• Adjustable language (English, German, French)
• Restart of charge and discharge after a loss of power
• Intelligent cooling fan control system for better charge efficiency
• LCD contrast, fan operation, temp scale and sound cues are fully adjustable
• Popups for information and warnings

Read the rest of this entry »

Having Fun, Team Spirit and being really FAST!

Team ROBITRONIC Racing shows, how it is done

Everybody wants to be successful. It is fun to be successful, but… and especially within our wonderful RC-Car hobby this BUT has to be written in major capital letters. Of course, success is an important factor, BUT it can not be the only thing that matters. “All for one, one for all!”: sounds maybe a little bit “strained”, but for Team ROBITRONIC these words are not just some “empty phrase”, but the basic philosophy for all activities. Following up this good old company tradition the Team newly formed around the new brands LOSI and GRP is starting in a very promising new Offroad season 2008.

The “West Division” from left to right: Carsten Keller, Alexander Munsch, Marcel Guske, Marc Kreisig und Markus Maier

Source : Robitronic

The BR50 is in a class all by itself. Made to be ultra durable, easy to handle and maintain. Features like floating gearboxes, a sealed center gearbox, all the suspension and tuning options you will ever need, and a powerful 4.6 big block.

Ready-to-Run
The BR50 comes pre-built, with factory driver set-up, multi-color printed body, and includes an AM radio system with a high torque steering servo and a mini-receiver. The tires are pre-glued on strong composite plastic wheels. The kit includes all Allen wrenches, a multi socket wrench, glow-plug igniter, and a 500cc fuel bottle, the only thing left to buy is batteries and fuel!

Read the rest of this entry »

Robitronic has released these hot new red-anodized, machined-aluminum upgrades for the Scalpel. Shown here are the 4-degree A-arm set, steering knuckle set, bumper plate, universal servo mount set, antenna mount, rear wheel adaptor (left), and right side diff plate. A titanium axle is also available to reduce rotating mass. Install these upgrades and you’ll have the sharpest (pun intended) Scalpel at the track.

• A-Arm set 4-degree – Item no. RA2082; $41
• Steering knuckle set – RA2085; $45
• Antenna mount – RA2099; $25
• Universal servo mount – RA2086; $32
• Bumper plate – RA2083; $21
• Diff right side – RA2102; $15
• Rear wheel adapter set (left) – RA2084; $10
• Titanium rear axle – RA2087; $25

Source : Robitronic & RC Car Action

Robitronic’s new fuel bottle is made from super flexible material for quick fills with control over the fuel.

The very soft fuel bottle is durable and will last forever. The long red anodized aluminum fill pipe reach easily any fuel tank. The aluminum ring and the rubber seals prevents leakage and easy filling. 500cc will carry enough fuel for many runs.

Source : Robitronic

Robitronic provides for the offroad section sealed ball bearings in standard sizes.

To minimize the attrition Robitronic offers now ceramic ball bearings with rubber gaskets.
All bearings are oiled for high rpm.
The 5×10x4mm ball bearings are ideal as clutch bearings.

Furthermore, there are now ceramic balls in the popular diameters of 2.4 mm and 3 mm. Packed on each 12-pack. Ideal for Ball diffs!

No. R18030 Ball bearings oiled (4 Pcs.) 5×10x4mm
No. R18031 Ball bearings oiled (4 Pcs.) 5×11x4mm
No. R18032 Ball bearings oiled (4 Pcs.) 8×16x5mm
No. R18033 Ball bearings oiled (4 Pcs.) 10×15x4mm

No. R18010 Keramic Ball bearing oiled (1 Pcs.) 5×10x4mm
No. R18011 Keramic Ball bearing oiled (1 Pcs.) 5×11x4mm
No. R18012 Keramic Ball bearing oiled (1 Pcs.) 8×16x5mm
No. R18013 Keramic Ball bearing oiled (1 Pcs.) 10×15x4

No. R18000 Keramic Balls 2,4mm (12 Pcs.)
No. R18001 Keramic Balls 3mm (12 Pcs.)

Source : Robitronic