Ryan Maifield - Pro-Line International 2008 Setup

Richard Saxton - Pro-Line International 2008 Setup

Neil Cragg - Pro-Line International 2008 Setup

Elliott Boots - Pro-Line International 2008 Setup

Source : CML Distribution

For the ultimate in power and top speed, Reedy is excited to announce an all‐new 11.1V 20C LiPo battery for enthusiasts that believe you can never have too much power. More voltage equals more power and higher top speeds. Easily increase power and speed by swapping out a 7.2V NiMH or 7.4V LiPo battery and replacing it with a Reedy 11.1V LiPo battery!

This high‐power battery pack is designed specifically for use in R/C cars and trucks. A unique hard case design helps protect the battery from damage. Integrated locking nubs simulate sub‐c cell profiles to allow the battery to be easily installed in a slotted touring car chassis. By simply flipping the battery over, perfect installation in off‐road vehicles is achieved.

To reduce resistance and increase power, Reedy’s 11.V 20C LiPo battery comes equipped with TRX® connector and 12AWG wires.

Read the rest of this entry »

Reedy’s high‐performance LiPo batteries are now available in a 4800mAh 20C saddle pack configuration for use in 4WD buggies! Designed specifically for installation in Team Associated B44 and other competition level 4WD chassis, this battery is the perfect choice for the racer who wants to enjoy the power, run time, and durability advantage of LiPo batteries. Its compact size and high capacity make it the natural fit for most saddle‐pack vehicles.

For maximum power and minimum resistance, Reedy’s saddle‐pack LiPo battery comes equipped with heavy‐duty 12AWG wires with no plug so that any favorite plug can be installed.

Read the rest of this entry »

TC5R Factory Team Kit #30105
For Rubber Tire Touring Car Performance

Based on Associated’s successful Factory Team TC5, we now bring you the TC5R, an electric touring car chassis that has been optimized for lower traction, rubber tire racing. The components that make up the TC5R have the desired attributes that are sought after for indoor and/or outdoor racing
with rubber tires, making the TC5R an even more lethal racing machine!

The TC5R starts with a full ball bearing, dual belt-drive system that transfers all the power from the motor smoothly and efficiently. With today’s motors and batteries delivering more power than ever before, the belt-drive system gives the TC5R a very predictable throttle response and feel, making it
easier to drive fast and carry more speed through the corners.

Read the rest of this entry »

TC5F Factory Team Kit #30104
For Foam Tire Touring Car Performance

Based on Associated’s successful Factory Team TC5, we now bring you the TC5F, an electric touring car chassis that has been optimized for high traction, foam tire racing.

The TC5F starts with a full ball bearing, dual belt-drive system that transfers all the power from the motor smoothly and efficiently.

Read the rest of this entry »

Event: ROAR Region 5 Onroad Championships
Where: Fort Wayne, Indiana
Dates: April 4-6, 2008
Classes: 1:12 Superstock, 1:12 Modified, Touring Superstock

Summit R/C Raceway presented the ROAR Region 5 onroad championships. The layout was fast and flowing with the exception of the S section coming onto the straight.

Read the rest of this entry »

Get ready to cool those high voltage brushed or brushless systems in your RC10 B44 with the new Vortex body by Pro-Line. Designed to give your car the latest in off-road styling and function, the Vortex was born from today’s top electric racer IFMAR Off-Road World Champion, Ryan Cavalieri.

“We need a body that will better cool the brushless systems we are using and looks like it is ready to compete,” says Ryan Cavalieri. So, Ryan, along with Pro-Line’s body molding expert, set out to create something that improve the overall performance of the car’s electronics and the car’s performance on the track.

Vortex for Associated RC10 B44
4 scoops for Maximum air flow.   With 4 unique cooling features (1 on each side of the body and 1 directly underneath the front windshield), the Vortex received it’s name. Vor-Tex 1. a whirling mass of air, especially one in the form of a visible column or spiral, as a tornado. This is exactly what is created with such ventilation as the Vortex.

Vortex for Associated RC10 B4
3 scoops for Maximum air flow

Source : Proline

Illuzion - RC10T4 Hi-Flow body
(fits Associated RC10T4)

For the ultimate in form and function, JConcepts introduces the Hi-Flow body for the Associated RC10T4. The Illuzion “Hi-Flow” styling presents a flowing design while incorporating many radical edge styling details for additional style and performance.  Race inspired aggressive styling, Illuzionized cab and cove hood scoop combined with a durable flowing bed design are just some of the features that make the new Illuzion “Hi-Flow” body stand out from the rest.

Illuzion – RC10T4 Hi-Flow Features:

* Original Illuzion styling
* Race inspired body design
* Illuzionized narrow cab and cove hood scoop
* Clear heavy-duty thickness polycarbonate with protective film
* Window masks and detailed Illuzion decal sheet

Source : JConcepts

#89284 Aluminum Rear Stub Axles

RC8 Stub Axles and Input Cups

Strong and lightweight, these parts are made in the USA out of high-quality 7075-T6 aluminum. Reduce rotating weight by 1.93 oz. (55g) when using the complete set of all three products! Reducing rotating weight equals more punch, stronger brakes, and more run time!

Read the rest of this entry »

New competition rules for EFRA and other sanctioned events in Europe require cells with a shorter length specification (43mm) than standard IB4600 cells. This required the development of an entirely new cell casing to comply with the new regulations.

The new EU Spec IB4600, treated and matched using the Reedy VMX Concept, produces a racing pack capable of powering winners at all levels of competition while sharing the increased durability and reliability of the standard IB4600.

Read the rest of this entry »