RCeasy 中文版

• Designed for Losi 8ight 1/8 Off Road Chassis.
• Provide extra front down force and low profile rear end to give more cooling space for engine.
• Made by 1.0mm PC . Clear Un-Cut Body shell.
• Can be use Both GP and EP brushless version Losi 8ight.
• Kit included windows mask and decal.

繼續閱讀 »

Double side nylon tool bag , special design for TiTAN Tools Set , easy use for load and unload all tools with organized location, include clutch fly wheel tool ,cross wrench and igniter , compact size easy for store and carry for you tools set, now tools set with tool bag is also available.

Tools included #10000 Full Set 16pcs with 15001 , 15002 , 15003 each X 1

繼續閱讀 »

As we are the body shell manufacturer, we need the best quality reamer ,now it’s ready, made by high carbon steel with heat treatment ,cut body shell with perfect round hold ,with aluminum cap to protect tool tip and user, it will be the best reamer for you to make perfect  body shell.

Source : Team Titan

• Build by High Quality Stainless steel and Aluminum with Anodized .
• Sell with EP1500mAh High Performance 2/3A Battery.
• Smaller with Sub-C Standard Igniter.

Source : Team Titan

Made by High Quality 7075-T6 Aluminum with Hard Coating
Come with 1st in 16T / 17T and 2nd 20T/21T
Double lasting then original pinion.

#50216 1st  16T FOR KYOSHO EVOLVA 2007/M3
#50217 1st  17T FOR KYOSHO EVOLVA 2007/M3
#50220 2nd 20T FOR KYOSHO EVOLVA 2007/M3
#50221 2nd 21T FOR KYOSHO EVOLVA 2007/M3

Source : Team Titan

Specification:

1.  Product number #60107N. (NEW TYPE 1/10 VDS LOLA)
2.  Front bubble room for front shock tower fit most moden 1/10 Touring car chassis .
3.  Made by high density 0.8mm PC light and strong.
4.  Includes decal sheet and wing and 4pcs side stiffener

繼續閱讀 »

• Light Weight 1/8 Off-Road Dish Wheel
• Made with Hard Formula Plastic
• Color: White only
• Weight 39.5g
• Dimension Ø81mmX 40.5mm
• 1pack 4pcs

Source : Team Titan

Specification

• #60109 BLITZ Altis 2.3, heritance of Altis 2.0 Racing performance.
• Body shell width 201.5mm , quick response for corner and sweep turning.
• Smaller roof and cockpit , smaller drag effect during high speed.
• Made by 0.8mm material , Sell without painting.
• 2 Stage Window mask and Decal included.
• EFRA Homologated with EFRA 2027 , EFRA / IFMAR Race ready.

繼續閱讀 »

Design for use in 1/8th On-Road Racing chassis, fits with Kyosho Evolva 05/M3,Mugen MRX-4X , Motonica-8.0R, weight same with original plastic pulley, but provide 3 times up durability,and with side dusty hole, you don’t need to clean your pulley after running.

SPECIFICATION:

S3M 18T Belt Pulley
Weight:4.9g
Aluminum 7075-T6 Hard Coating.

繼續閱讀 »