RCeasy 中文版

355053 Center Diff Spur Gear 43T
355055 Center Diff Spur Gear 41T

Large bevel gears for center differential are machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.

The gears are individually machined on a precision German gear machine and every gear is individually tested, inspected, and run in. The diff gears are then laser engraved for easy and instant recognition.

繼續閱讀 »

352256 XB808 Alu Steering Block Right - Swiss 7075 T6 - Hard Coated

352266 XB808 Alu Steering Block Left - Swiss 7075 T6 - Hard Coated

Authentic XRAY alu steering blocks for XB808 are CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.

Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.

Smart XRAY engineering includes use of composite bushings to secure ball-bearings in both sides of the steering block, allowing perfect fitment and smooth operation to ultimately impart much higher lifetime compared to bearings installed directly into aluminum steering blocks.

繼續閱讀 »

Clutchbells for XB808, manufactured on a precision manual gear machine from HUDY Gear Steel – a material specially formulated and developed for use in gears. Heat treated for highest strength, minimal wear and extra-long lifespan. The XB808 clutchbell features unique oversized ball-bearings designed and engineered by XRAY.

Replacing the standard 5×10 bearings with 1.3mm balls, the oversized 808 clutch bearings are 5×12 with 2.0mm balls and extra-thick bearing walls. This translates to higher load-carrying capabilities which will increase the life of the bearings and reduce the risk of clutch bearing failure during long final runs. The bearings come with special high-temperature resistant grease to ensure proper lubrication during high-revving engine operations and long runs.

繼續閱讀 »

353356 XB808 Alu Adjustable Rear Hub Carrier - Swiss 7075 T6 (7mm) - Hard Coated

Authentic XRAY alu adjustable rear hub carrier for XB808 is CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.

Smart XRAY engineering includes use of composite bushings to secure ball-bearings in both sides of the hub carrier; allowing perfect fitment and smooth operation to ultimately impart much higher lifetime compared to bearings installed directly into aluminum hub carriers.

繼續閱讀 »

Front anti-roll bars:
352480 XB808 Front Anti-Roll Bar 2.0mm
352482 XB808 Front Anti-Roll Bar 2.2mm
352484 XB808 Front Anti-Roll Bar 2.4mm
352486 XB808 Front Anti-Roll Bar 2.6mm
352488 XB808 Front Anti-Roll Bar 2.8mm

Front anti-roll bar wires of different thickness are optionally available for fine-tuning the setup of your XB808. XRAY anti-roll bars are manually manufactured in-house from premium heat-treated spring steel wire using precision bending machines that ensure equal side angles. Manually measured, selected, and straightened to eliminate all tweak.

繼續閱讀 »

352216 XB808 Alu Caster Block 10° Right - Swiss 7075 T6
352226 XB808 Alu Caster Block 10° Left - Swiss 7075 T6

Authentic XRAY 10° alu caster blocks for XB808 are CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.

Lightweight block features ‘zero kingpin’ suspension geometry. The preset 10° caster block is integrated and non-adjustable. Combined with the XB808 front kick-up of 10° this block gives a total caster angle of 20° for increased steering and precision. Includes XRAY composite bushings for super-precise and smooth steering action. Laser-engraved with the XRAY registered logo for authenticity, and caster value and L/R symbol for quick and easy identification.

Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time.

Source : XRAY

XRAY presents the ultimate high-performance racing springs that have been specially developed to give better balance and an additional range of choices to fine-tune your car.

• XRAY Authentic High-performance 808 Racing Springs
• Complete Range of spring choices for ultra fine-tuning
• linear springs with same thickness of wire
• Stiffness of springs is controlled by the number of coils
• springs are individually measured, controlled and matched
• each spring pair is matched for identical characteristics
• available as a pair of springs separately front & Rear
• the Most ultimate professional off-road springs
• color-coated for quick & Easy identification

繼續閱讀 »

351341 XB808 Graphite Upper Plate

Authentic XRAY optional lightweight graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight. Fits XB808.

All XRAY graphite parts are CNC-machined in-house using state-of-the-art fully automatic German CNC-milling machines, ensuring the tightest tolerances and highest manufacturing quality. Manufactured from high-grade, custom-manufactured carbon graphite that is specially produced based on XRAY’s own recipe and specifications.

繼續閱讀 »

352573 XB808 Alu Steering Plate Swiss 7075 T6 (3mm) - Hard Coated

Authentic XRAY alu steering plate for XB808 is CNC-machined from 3mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Lightweight, ultra-rigid design for unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity.

Features an additional middle Ackermann setting position for even more precise and smoother Ackermann steering setup.

繼續閱讀 »

352087 XB808 Front Alu Brace Swiss 7075 T6 (5mm) - Hard Coated

Authentic XRAY front alu brace for XB808 is CNC-machined from 5mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-rigid design and unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity.

繼續閱讀 »