Kawada Racing - LX 2×2 LiPo Battery Balance and Twin Charger

Available : Mid July 2008

Balance charge that safely charges with Li-Po battery
- Balance charge that is built-in four independent chargers safe and is certain.
- Two packing can be charged simultaneously. (Only two cell battery :. )
- It will use it with outlet (AC100V) at home in using with an optional AC adaptor together possible.

- Another as a usual charger also has such a usage.

Read the rest of this entry »

LiPo LX4000R 30C 7.4V 4000mAh 30C Battery

Available mid July 2008
30C of super-marvelous high-power.
High spec Li-PO that put race youth in view
- Lithium Polymer battery of large capacity and high power (30C)
- A hard case with high safety (carbon print) is adopted.
- Bottom shape that just fits battery slot
- Port equipment for balance charge (connector attachment)

LX4000R spec

• 7.4V-4000mAh 30C (two cells)
• size: 138×47×23mm
• weight: About 230g

Read the rest of this entry »

Principal equipment
* Carbon make chassis, upper brace, damper brace and lower brace, pivot bridge
* brush less motor corresponding motor mount
* 1/4″ The carbon rear shaft
* the carbon suspension arm (the independent suspension) the upper arm mount of 4 types of
* 0°, 5°, 10° and 15° * [derurin] it starts shaving, the pivot ball
* φ6.5 bulk oil damper & the natural FRP make T bar & the carbon rear shaft
* high accuracy film gate wheel
* EMB battery mount & Battery bracket & large diameter diff. ring
* FRP antenna & servo saber
* full ball bearing

Read the rest of this entry »

The assembly confirmation of the F103 conversion ended safely, too.
It is work necessary to confirm the incompleteness of the confirmation
and assembling instructions on contents of the product.
Having used it for the assembly confirmation is F103RM from Tamiya
recently from whom everything put on the market.

Read the rest of this entry »

Available : End of May

2008 JMRCA EPX Class Specification. 0.9mm Single trun 19T based on EXP class regulations. The shaft end shape is C1 shape base on the JMRCA regulations.

• large-scale cooling fan
• three DSE connector
• large capacity chip, prevent down of power by three core hole of end bell torque type with 3mm rotor.

Source : Kawada

Picture from Kawada

Read the rest of this entry »

Translation :

It is an one F103KAWADA conversion of a new product of the hobby show announcement. (Is the hobby show announcement good before the show of ..saying.. hobby in the announcement etc.)
It becomes a carbon double deck specification. This Comba doesn’t exist only by making it to the carbon chassis. It is considerably related. T bar of Riya is assumed to be an exclusive use, and parts equipped with T bar become considerably smooth movements the misappropriation of the thing for M300. And random run. It runs fear. Finally, it smacked it out with Modified 8T(7.2V) though our company and the practice run by Fukuoka were done at first by 23T. It is thinking 1/12 fast.

The price makes a set considerably by handy (?) the carbon chassis, the upper deck, the damper brace, the posts, Praparts, and the screw nuts and is pre-bid price \12,800 (excluding tax).

By the way, the servo mount (type to place the servo) for F103GT is separately necessary for the conversion from F103RM resold recently. Please buy that additionally.

The F103 KAWADA conversion to which externals and running change suddenly to
the enjoyment.

Source : Kawada

Available Mid April, 2008

From height 1mm to 10mm it is the height gauge which can be measured with the 0.1mm mark. Optimum to setting such as it is height severe 1/12 racing. Being to be compact size, inserting in the tool box, it does not be bulky. The crotch lining in the black alumite the laser also numerical value has become very easy to see with the graduation of the white letter which is stamped. In the side the KAWADA logo which does not accumulate is stamped in matte duffing leak.

The total length approximately 10cm aluminum it starts shaving, the black alumite finish

Source : Kawada

Available March 13, 2008

It becomes in the body for popular M300GT and fair lady Z body of the GT500 specification becomes high finished of the scale feeling very much newly this time of standard SC430 similar body of ..lineup.. kit.

Wheelbase 210mm
Decal attachment

Read the rest of this entry »

M300GT rises more and more by the NEW body appearance. …dependence.. ?Mi and ..turning over.. wing are different for a moment. Sta is different though the wing shape is also different.
The wing here is an optional and GT wing of the sale schedule (tentative name). Because it is a straight typing of the body, detaching the body can be facilitated.

Read the rest of this entry »