Posts Tagged “Tamiya”

Available : July 19, 2008

【 マルチパフォーマンス・スーパーカーをRCで乗りこなす 】 「マルチパフォーマンス・スーパーカー」をコンセプトに、世界第1級の高性能とイージードライブを実現して2007年12月に市販されたNISSAN GT-Rの電動ラジオコントロールカー組み立てキットです。空力を追求した存在感あるフォルムをリアルに再現したボディはポリカーボネート製。ドアミラーやリヤスポイラーは別パーツで用意しました。さらに、メッキパーツの前後ライトケースに高輝度LEDをセット。ヘッドライト2灯(ホワイト)、テールライト2灯(レッド)の点灯が楽しめます。シャーシは組み立てやすさに加えて、コントローラブルな操縦性を発揮するシャフトドライブ4WDのTT-01 TYPE-Eを採用。実車と同デザインの7本スポークホイールには、トレッドパターンが彫刻されたレーシングラジアルタイヤを装着しました。

Read the rest of this entry »

Comments No Comments »

  • The Mercedes-Benz Unimog’s body is made from lightweight polycarbonate material.
  • CR-01 chassis features a heavy-duty ladder frame with strong lightweight pressed aluminum channels and cross channels.
  • 4 link coil suspension provides the flexibility needed to conquer difficult rocky terrain.
  • Center gearbox features planetary gears with a compact design enabling the battery to be mounted lower for a better center of gravity.
  • Newly designed 3-piece beadlock wheels mounted with massive 125mm diameter and 6mm wide rock crawler tires are ready for any terrain.
  • Powered by a 540 motor.
  • Can be fitted with Yellow (Front) and Red (Rear) TLU-01 LED Lights (ITEM 53909)
  • The Unimog is compatible with a wide range of Option Parts

Source : Tamiya

Comments 1 Comment »

The entire area potential rise
In order that the weight distribution which depends on the vertical ranging center battery and is superior, adopted the long suspension arm high road holding the shaft drive 4WD buggy chassis of merit, makes the potential of DF-03 full show, fully loading the option part, in the name of MS it finished in the suitable machine. While raising road surface following characteristic, with the aluminum damper which combines the white collar worker spring in addition to the hard turn buckle shaft, raising the underside durability. It pursues also drive efficiency with the assembly universal shaft and the aluminum one somatotype propeller cup joint. It equips also center one way in addition to the ball diff. of Slippers clutch and the front and back which it is essential to race/lace. Also the positive attitude change which conveys power to the road surface effectively, is by the brake is possible. Polycarbonate make body and wing and marking sticker attachment for front residence color. With the color ring and the completeness equipment where combative spirit boils up, vividly you run and come out off load course.

Read the rest of this entry »

Comments No Comments »

The 801Xt is a 1/8th scale competition level assembly Truggy kit, designed and tested in Southern California, USA. The highly efficient drive system comes from the optimized placement of the front and rear propeller shafts. The drive-line is virtually straight, which offers the most efficient drive-line possible in its class. The 801Xt chassis has plenty of adjustability to fine tune it for the most demanding of race tracks across the globe. TRF drivers from all parts of the world will be piloting this new competition level Truggy in the coming months in an effort to exploit its potential and further develop the new line of 801Xt options soon to come!

Read the rest of this entry »

Comments No Comments »

Sharp running of direct drive charm
It is the assembly kit of the electromotive RC car where the motor pinion drives the spur gear directly, can enjoy the sharp running only of rear [dairekutodoraibu]. The chassis constitution which combines the upper deck of half type to FRP make [rowadetsuki]. The front left and right independence of [kingupinkoiru] spring system, the FRP make T bar present appearance it controls the rear with the friction plate and the coil spring. The constitution which applies the load on the rear wheel which loads 540 type motors onto the height adjustment type body, as for the 7.2V battery for travelling loading onto the rear approaching, becomes the driving wheel. In addition, standing upside down mounting steering wheel servo, isometric conversion the tie rod left and right. The steering wheel quality which does not have [kuse] is produced. It is easy to assemble with simple constitution, due to the lightweight body the sharp running and long haul travelling it can enjoy. Polycarbonate make body, front and back wing attachment.

Read the rest of this entry »

Comments No Comments »

TT-01 Type-E Chassis, will be available Jun 28, 2008

The machine for the one make-up race of the highest peak

It is developed for highest peak “Porsche super-cup” of the one make-up race that has been held in ten countries in the world, and delivery 911GT3 cup car in a private team. Porsche especially manages the machine, and the assembly kit of the electric radio control car that reproduces VIP car that guest players drive at each race. The modeled body is made of the polycarbonate to enough actually feeling as for the form with power. It can enjoy the light lighting by setting high luminance LED of two headlight lights (white) and two rear light lights (red). Moreover, the logo etc. of the pinstripe and the Porsche of gotten Gold and white were prepared in a chic black color in the sticker.

Read the rest of this entry »

Comments No Comments »

Sea bass SX4 WRC (TT-01 Chassis TYPE-E)

Available : Jun 28, 2008

Worldwide rally championship the sea bass first WR car which fights

It is the electromotive radio control car assembly kit of the sea bass SX4 WRC where from 2008 full it participates to worldwide rally championship, commencement game Monte Carlo, acquires the point in 2nd game Sweden and attracts attention. The marketing car of 5 door hatch-backs in the base, reproducing the forum of the force which the fender front and back to wide is converted to real with polycarbonate. The small door mirror and the roof ventilator, preparing the large-sized rear wing with another part, it tightens detail. In addition, the headlight 2 light (white), the tail lamp 2 light (the lead-lead) setting high brightness LED, light/write illumination is possible. The rally car it seems, you prepared many sponsor logographs with the sticker.

Read the rest of this entry »

Comments 1 Comment »

Available : Jun 28, 2008

ARTA Garaiya - TB-03 Chassis

Individualist faction machine of super GT300 class
The GT300 machine that apr produced based on 2-seater sports car “Wakiwakiki” that the Autobacs sports car laboratory developed is ARTA Garaiya. Six V type cylinder natural suction engine of 3.5 liters is Midoshippmaunted, and a low form and high together combat power are demonstrated. Activity as it enters super-GT300 class in 2007, new Demmorio and both player Shinichi Takagi depend driving, and it wins the championship in Fuji speedway of the third war. It is an assembly kit of an electric RC car that reproduces this individuality sect machine that fights over the champion against Final Race. Feature shape that expands behind the rear end of Riyacaul to say nothing of the overall style composed of the line with the intonation is reproduced by the polycarbonate in the round, too. As for the actually feeling body, the RC car invents a high, aerodynamic performance.

Read the rest of this entry »

Comments 1 Comment »

Available : Jun 28, 2008

Dignity of 1976 champion machine drifts

The manufacturer world championship race/lace which starts from 1976 those where it was developed as the group 5 machine which fights are the Porsche 935 turbo. Large remodelling is administered 930 turbos of marketing by the base, with, from 260 horsepower of marketing type truly to 590 horsepower e.g., the horizontal opposition 6 cylinder engine of aerodynamic volume displacement 2857cc per Bosch make fuel injector and 1 cylinders adopts 2 plugs, raises the supercharging pressure of the KKK turbocharger it is to be raised. The body moving the headlight to the front spoiler, finishes the fender part to flat, equipping the large-sized rear wing. Also substantial light weight conversion actualizes. As for this year 2 units of martini color participate, win in the 1st, 2 games. 3rd - 5 games victory is taken in BMW, but taking back condition again from 6th game, conquering 6th, 7 games. 4 victory in all the 7 games is increased, this machine which has become the champion beautifully, joins to the [tamutetsukugia] assembling kit series.

Read the rest of this entry »

Comments No Comments »

Available : Jun 21, 2008

To new territory of shaft 4WD

The top model of the shaft drive 4WD chassis, TB evolution 5 accomplished further evolution. Lower upper you use the 2.5mm thick carbon deck together, move motor helicopter loading site to the front and raising looking back characteristic. In addition, it raised rigidity by the fact that the upper deck rear section is designated as another part of the aluminum make, improved also maintainability such as spur-gear exchange. Furthermore, adopting the know-how of TRF416 such as upright of 1050 bearing specification and steering system and aluminum suspension mount of center support type. To equip front one way and rear [borudehu], the aluminum diff. joint standard equipment. In addition, you install the front and back damper stay of the 3mm thick carbon and make, increase the hole and more finely setting has become possible. In addition to sharp turn in, the TB evolution 5 MS where degree of freedom of the line taking spread. The hard battle is thought, it can enjoy freely.

Read the rest of this entry »

Comments No Comments »

rcSites.com - The Best list of top RC websites RCeasy Topsites List