The XP SC450-BL Brushless ESC and Reedy 540R Brushless Motor feature the latest brushless ESC and motor technology along with the design and engineering experience that is responsible for 28 World Championship titles.

The XP SC450-BL Brushless ESC is light and compact for easy installation in most 1:10 vehicles. Simple calibration and a wide variety of tuning options make this ESC perfect for both casual enthusiasts and racers. Due to its sensorless design, the Reedy 540R Brushless Motor operates powerfully and efficiently without complicated sensor harnesses. This motor is perfectly suited for use with ESCs, such as the XP SC450-BL, that are designed to operate sensorless brushless motors.

When used in combination with one another, you create a potent combination of power and efficiency that brings performance to a new level. More power and less maintenance elevate the fun factor by increasing top speeds and reducing down time.

Read the rest of this entry »

Share on Facebook

Wolfpacks Now Available With Deans® Ultra Plug® Connectors in 7.2V and 8.4V versions!

To satisfy the demands of enthusiasts worldwide, Reedy Wolfpacks are now available equipped with Deans® Ultra Plug® Connectors in 6-cell 7.2V and 7-cell flat 8.4V versions! Wolfpacks are assembled using Reedy’s high-tech NiMH sub-C SC-R cells. This exclusive cell features high capacity for extended run times while delivering maximum output thanks to its current carrying capabilities and ultra-low internal resistance. To improve power output, prevent meltdowns, and increase reliability, an industry- standard Deans® Ultra Plug® connector has been fitted.

Read the rest of this entry »

Share on Facebook

Full scale realism meets 1:18 scale fun! We’re excited to bring short-course scale graphics to the SC18. All your favorites are here: Lucas Oil, Pro Comp, KMC Wheels, Speed Technologies, and AE Team. Each truck body comes fully painted with all decals attached. Decals are also available separately.

• SC18 Body, Lucas Oil
• SC18 Decals, Lucas Oil
• SC18 Body, Pro Comp
• SC18 Decals, Pro Comp
• SC18 Body, KMC
• SC18 Decals, KMC
• SC18 Body, Speed Tech
• SC18 Decals, Speed Tech
• SC18 Body, AE
• SC18 Decals, AE

Available: March 2010

Source : Team Associated

Share on Facebook

Designed using the state-of-the-art wireless and advanced-programming technology, the XP3-SS 2.4GHz Radio Control System will advance and simplify the control of your surface model while providing many years of enjoyment. Featuring spread spectrum and smart-frequency hopping systems, the XP3-SS delivers precision control with greatly reduced risk of interference, while a variety of standard features enhance user friendliness.

Read the rest of this entry »

Share on Facebook

Designed using the state-of-the-art wireless and advanced-programming technology, the XP3-SS 2.4GHz Radio Control System will advance and simplify the control of your surface model while providing many years of enjoyment. Featuring spread spectrum and smart-frequency hopping systems, the XP3-SS delivers precision control with greatly reduced risk of interference, while a variety of standard features enhance user friendliness.

Specifications: Receiver

• 4-channels (4th Ch slot = battery slot)
• Frequency: 2.4 GHz (2.402-2.479 GHz)
• Input Power: (4) AA alkaline or NiMH 4.8-6.0V
• Dimensions: 35.6 x 18.3 x 14.2 (1.4 x 0.7 x 0.55 in)
• Weight: 6.5g (0.23 oz)

Source : Team Associated

Share on Facebook

1:18 Scale Electric 4WD Off Road Truck/Buggy Kit!

2 Choices, 1 Kit!

For those who are having difficulty deciding on whether to build a RC18T2 truck kit or RC18B2 buggy kit, we have great news! The RC18T2/B2 kit has the parts required to assemble either vehicle. If you change your mind later, simply use the extra parts to create the other vehicle!

RC18T2/B2 Kit Features:

• Buggy and Truck racing bodies with rear wing included
• Dish racing wheels with aggressive mini pin racing tires
• Molded composite chassis with sealed drive train
• Blue aluminum threaded shock bodies
• Durable gear differentials with a 2.0:1 ratio gearbox
• 2-belt drive system for ultimate durability capable of handling most brushless/LiPo combos
• Newly designed servo saver for optimal straight line tracking
• Hinged battery strap for quick battery changes
• Complete set of 15 precision steel ball bearings
• Vertical ball ends for easy roll center adjustments
• Steel turnbuckles with lengthened ball cups
• Blue aluminum ball studs
Read the rest of this entry »

Share on Facebook

Factory Team Aluminum Metric Screws are now available in single size packages. M2 and M2.5 screws come four per package while M3 screws come six per package.

• #8545 M2X4 BHCS Blue Aluminum (4)
• #8546 M2X6 BHCS Blue Aluminum (4)
• #8547 M2X6 FHCS Blue Aluminum (4)
• #8548 M2.5X4 BHCS Blue Aluminum (4)
• #8549 M2.5X6 FHCS Blue Aluminum (4)
• #8550 M3X6 BHCS Blue Aluminum (6)
• #8551 M3X6 FHCS Blue Aluminum (6)
• #8552 M3X8 BHCS Blue Aluminum (6)
• #8553 M3X8 FHCS Blue Aluminum (6)
• #8554 M3X10 BHCS Blue Aluminum (6)
• #8555 M3X10 FHCS Blue Aluminum (6)
• #8556 M3X12 FHCS Blue Aluminum (6)

Source : Factory Team

Share on Facebook

Team Associated announced the 1:8 car and Brushless Combo available in :

• RC8e with SPX8 and Vector 8 2500Kv Combo
• RC8e with SPX8 and Vector 8 2800Kv Combo
• SC8e with SPX8 and Vector 8 2500Kv Combo
• SC8e with SPX8 and Vector 8 2800Kv Combo
• RC8Te with SPX8 and Vector 8 2500Kv Combo
• RC8Te with SPX8 and Vector 8 2800Kv Combo

Source : Team Associated

Share on Facebook

Now you can enjoy Team Associated’s world-class performance with true scale authenticity in a 1:18 scale late model oval racer! Team Associated is proud to bring to you the RC18 Late Model; a 1:18 scale RTR (Ready-To-Run) electric 4WD late model oval racer.

The RC18 Late Model features a newly designed chassis with a fully enclosed, 2-belt, drive train system that is capable of handling the extreme amount of power that today’s brushless motors and LiPo batteries can dish out. Along with durability, the drive train is sealed to help keep rocks and dirt away from all the gears and pulleys.

The RC18 Late Model comes fully assembled with a painted and decaled late model race body, chrome late model style wheels, aggressive checkerboard tread scale tires, all designed to look just like the full-size race cars that run in dirt oval series around the country. At first glance it’s easy to see that the RC18 Late Model is another champion by design!

Source : Team Associated

Share on Facebook

Team Associated is proud to announce the introduction of the Factory Team ball differential specifically designed for the SC10. Once built, the differential fits directly into the stock SC10 transmission case. No modifications are required!

Racers have long enjoyed the handling benefits that a ball differential offers. For nearly 30 years, competition electric off-road cars have been equipped with them, and for good reason! Ball differentials improve handling consistency over bumpy surfaces while increasing cornering capabilities.

Each outdrive is machined from hardened steel for exceptional durability, then lightened to reduce rotating mass. Outdrives are also available separately so that current T4 and B4 differentials can be upgraded for use in the SC10.

Source : Factory Team

Share on Facebook